To buy good environmentally friendly paints, you have to look at the actual combat experience.
When we decorate the house, the last part of the paint construction, then his importance can not be ignored, then how can we avoid buying affordable and environmentally friendly paint when purchasing, to install a healthy home that is comfortable and comfortable to live in? Here, I will share an article about how to buy environmentally friendly paints, hoping to inspire your audience:
1. Look at the surface of the paint. The high-quality colorful paint has a colorless or yellowish layer of protective glue, which is clear and the surface is usually free of floating objects; if there are floating objects, it should be purchased with caution.
Non-environmental coatings, due to excessive levels of harmful substances such as VOC and formaldehyde, have a pungent odor. If there is a pungent smell in the paint, the toxic paint may not have a taste, but the paint with odor must have problems. Consumers need to be cautious to buy. Of course, don't buy products that smell very fragrant. Generally, these kinds of coatings add flavor, and the additive itself is a chemical product, which is difficult to guarantee environmental protection.
2. If possible, ask the seller to open the paint bucket and check it out. If the paint has severe delamination, the quality is poor; stir gently with a stick, and after the lifting, the paint stays on the stick for a long time, and the coverage is even, indicating that the quality is good; the hand is light, the finer the better. Paint distributors who have no problem use the method of opening the cover to let consumers visualize the environmental protection of the paint.
3. Carefully review the product quality inspection report, paying particular attention to the total organic volatilization (VOC) of the coating. Organic volatiles pose a significant hazard to our living environment and to ourselves. Toluene, xylene, methyl ethyl ketone, acetate, etc. are all limited, we should try to reduce the amount of these solvents.
4. Buy less consumption: consult the merchant for the number of paintings and the area of ​​the paint, the calculated amount and the cost per square meter of material, not deceived by the unit price of each group (barrel), the paint is made up of solid parts. Membrane) and volatile matter composition, the solid content is high 70% to 80%, low is less than 10% to 20%, the unit price is low, the consumption is particularly large, the calculation is more expensive and waste, and the quality effect difference.
PPFD is a key factor in the detection of Plant Growth Light. Optical quantum flux density (PPFD) refers to the luminous flux density in photosynthetically active radiation. Most Plant Growing Lamp on the market that can achieve an average PPFD of 2000 μmol/m²/s have a power of 600W, while Litehome's Plant Light just only need 200W. Can greatly reduce your electricity bills.
With lower production costs, your products will have more advantages. This is why you should choose litehomeLED Plant Grow Light.
Led Grow Light Indoor Plants,Led Grow Light 250w,Led Grow Light Kit,Likesuns Led Grow Light
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com