Some tips and windows when inspecting a house are the acceptance of common diseases

"My house is a big problem, no small problems continue." Miss Li, home buyers in this period concluded. Her house acceptance was relatively smooth, but the inspection of the doors and windows and the seepage problem of the sky canopy was not a minor issue.

Accompanied by inspectors told reporters that the acceptance of doors and windows has a complete specification, ordinary citizens can also self-inspection. New house seepage has always been troublesome, but both water stains and rust marks can be seen. If consumers accept the house themselves, they may wish to pay more attention to whether there is any abnormality on the wall or on the ground.

Windows and doors common problems can not be overlooked

On the inspection report issued by the home inspector, the problems of this property are clearly displayed: the entrance door surface has scratches, the door leaf is installed with warping, the door lock interface is deviated; the room four-window fan handle is not flexible, close too tight; balcony door Can not be closed. “These are more common problems, but turning a blind eye will inevitably affect the living conditions in the future.” Inspector told reporters that the acceptance of doors and windows has been the national standard. In short, windows and doors should be clean, securely mounted, and free of scratches. They must be flexible, close and tight, and not tilted. Sliding door and window sashes must be protected against falling. In order to prevent water seepage, windows need to be compacted with glass glue and sealant.

There are two problems with the doors in the houses that are accepted this time: one is that the windows in each room have windows to open; the other is that there are no guardrails in the floor windows in the suite and there are hidden safety problems. The inspector reminded Miss Li that the sashes in the interior could require the developer to repair or replace the windows. The floor-to-ceiling windows must be equipped with guard rails and pay attention to the height of the guardrails and the clearance between the railings.

Canopy seep water can be seen

Another annoying problem is that there are water seepage problems in the ceiling of the room and the living room, and there are spots of rust on the roof.

The inspector told the reporter that the commercial housing is generally an underground water pipe. If it is not properly treated, the moist environment caused by the later construction of the shed and the white ash will cause the water pipe to rust. If you do not do the treatment before your stay, it will increase the iron pipe rust when you do the decoration. Ms. Li needs to negotiate with the developer and ask the other party to reopen the rust-proof treatment. The yellow marks on the ceiling of the home garden may be due to the fact that the waterproofing works are not in place and water seepage occurs. The developer needs to redo the water to repair it.

“The seepage problem is still relatively common, and it is also troublesome. Cracks in exterior walls and lack of waterproofness will cause water seepage. Consumers are advised to carefully check the walls and floors for signs of water seepage when they accept the house.” Inspectors advise.

Doors, windows, living room, windows, house, room, glass, switch, decoration, living room, glass, sliding, glass doors

Hook And Loop Sanding Disc

Hook and loop sanding disc is also a classification of round sanding disc, it is also called self-adhesive sandpaper, which can be glued to the sanding disc tray and very convenient to use
Compared with Abrasive Fiber Disc , round disc hook and loop also can be a kind of Quick Change Disc , which is more convenient and cost-effective.
We use the high quality sandpaper rolls and total automatic Abrasive Sanding Disc punching machine, so the production ability is very enough and has ready stock.
Round sandpaper has the advantages of anti-clogging, anti-static, good flexibility, and high wear resistance.


Due to its wide range of uses, there are also many varieties of hook and loop sanding disc. The most commonly used are red sanding disc, yellow/gold sanding disc, green sanding disc, and white sanding disc, etc.
The sandpaper disc is using aluminum oxid abrasives, with grits as below: 40#, 60#, 80#, 120#, 180#, 240#, 320#, 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000#.
The abrasive polishing disc can be punched into various shapes, round, round with holes, triangle, rectangle, iron shape, neckline shape, etc.
This product is round abrasive disc size: 100mm, 125mm, 150mm, 180mm, 225mm or other size can be customized.
The holes best selling is with 6 hole, 8 holes, 15 holes, 17 holes or customized.


We can also supply Abrasive Flap Disc , Flap Disc Backing Pad , Flap Disc Adhesive Glue, Flap Wheels , Abrasive Machine (Flap Disc Making Machine, Abrasive Belt Making Machine, Sanding Disc Machine , Flap Wheel Machine ), Cotton Buffing Wheels , Nylon/non-woven Surface Conditioning Products, Cutting Wheels , Grinding Wheels etc. If you are interested please feel free to contact us.

Aluminum Oxid Abrasive Sanding Disc 225mm Sandpaper 12 Jpg

Sandpaper Automotive 7 Jpg

Car Sanding Disc 6 Jpg


Hook And Loop Sanding Disc,5inch 8 hole sanding disc,Abrasive Sand Disc,Alumina Sanding Disc,Angle Grinder Sanding Disc

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com