The main purpose of the slurry pump is to transport the slurry in the production of the industrial sector. Applications such as metallurgy, electric power, coal, mining and other industries are inseparable from the slurry pump. The working characteristic of the slurry pump is that the slurry to be treated has various solid particles and requires us to know more about the precautions for its use in daily operation. Slurry pump in the treatment of more impurities in the slurry particles, such as the removal of mud, you can place a filter at the inlet, which can reduce the impurities into the pump particles to reduce the probability of card pump, extend the slurry pump Service life. The use of slurry pump should not be too long, if there is spare pump, it is best to take the form of work rotation. Slurry pump in the work process, the pump should be placed on the ground, to maintain the stability of the pump. If it is a slurry pump or submerged slurry pump and other submersible slurry pump, it is limited by the structure of the pump must be placed in the water, then the motor needs to be placed on the water and fixed to maintain the slurry pump Stable. Part of the slurry pump with a mechanical seal, the use of such slurry pump shaft seal water supply must be guaranteed, and non-water-free operation, to avoid dry seal caused by mechanical seal burn. In general, the mechanical seal of the slurry pump should be connected to the shaft seal water before use, and after stopping the pump should be maintained for at least 3 minutes more water. Slurry pump is currently used in the mining industry concentrator, the main deal is the primary ore, in which case the slurry pump wear will be relatively serious, so its service life is relatively low, especially according to The hardness of ore processing, particle size, slurry pump abrasion will be different.
Self-Recovery Rapid Door
High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.
High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".
This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.
The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.
Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com