Shantui Construction Machinery uses corrosion-resistant series lubricants

Shantui is a large state-owned enterprise mainly engaged in the production of bulldozers, excavators, loaders and road section machinery. In 2006, the comprehensive performance and market share of bulldozers produced by Shantui ranked third in the world, ranking first in China. .

The bulldozer oil produced after the establishment of Shantui is a matching oil for some lubricating oil factories in the society. Users often reflect such problems in the process of using bulldozers. Shantui has been in this field for decades, and finally realized the importance of lubricating oil and fully realized that it is difficult to meet the needs of construction machinery. In June 1994, Shantui invested heavily to establish Shantui Petrochemical Co., Ltd., and Shantui Petrochemical Co., Ltd. cooperated extensively with domestic and foreign senior scientific research institutions, and was committed to the research and development and production of oil for construction machinery, first producing oil for installation, and users reflected After replacing it with other brands of oil, the performance of the whole machine is declining, and it is required to purchase the oil for installation. Therefore, Shantui launched the market-specific oil for service, so that the comprehensive performance of the Shantui bulldozer has been greatly exerted, and it has been widely praised by users. The production and sales of bulldozers will increase year by year.

With the introduction of excavators and loaders, Shantui found that the lubricating oil used in bulldozers is still insufficient in the overall performance of the whole machine when used on excavators and loaders, so it is dedicated to special oils for excavators and loaders. The research and development, with the introduction of special oil for excavators and loaders, has been widely praised by users. Therefore, Shantui Petrochemical Co., Ltd. was designated by China Construction Machinery Industry Association as the only oil production base for construction machinery in China in November 2003. . Therefore, the special lubricants for the Shantui Komatsu bulldozer, excavator and loader series were launched, and they were randomly exported to Yemen, Australia and other countries. At the same time, many domestic OEM companies (engineering machinery manufacturers) also use a variety of special oils as their installed and service oil. The sales volume of various special oil products has doubled year by year.

With the establishment of the Lubricant R&D Center of China Shantui Construction Machinery Research Institute in November 2006, combined with various kinds of information feedback from the market, Shantui fully realized that all kinds of construction machinery not only have different structural characteristics, but also different working conditions. The working environment is also different. There are many working environments that are rainy or humid, and inevitably come into contact with water and air. In general, the lubricating oil anticorrosion ability is difficult to meet the requirements of these working conditions and construction machinery and equipment under the working environment. After more than two years of research and development and real-time simulation of comprehensive performance experiments, the researchers at the Lubricating Oil Research Center successfully introduced the corrosion-resistant series of lubricants that are more suitable for various working conditions and working environments of engineering machinery. The introduction of this series of lubricants will definitely make the comprehensive performance and service life of construction machinery equipment greatly improved and improved.