RGB Series Hose Pump Preparation before starting

Before the RGB series hose pump starts working, please do the following preparations before start-up: a. Check whether the lubricating oil in the reducer inside the pump chamber is sufficient. b. Check the pump inlet and outlet pipe is installed and fixed properly, the flange bolts are tightened. c. Check if the pump's inlet and outlet valves are fully open. d. Press the start and stop buttons, point the pump, check whether the motor steering and pump inlet and outlet match, and check whether the pump stuck. After the above checks are correct, before commissioning can be switched on, no abnormalities in all aspects, they can be put into normal work. Hose Pumps Related Articles Read: Understanding How Peristaltic Pumps Work Peristaltic Pumps Benefits Features of Concrete Pumps