Overview and characteristics of W single stage cantilever vortex pump

W pump is a single-stage cantilevered vortex pump, pump inlet and outlet direction is vertical upward. Whirlpool impeller can be moved in the axial direction of the shaft to ensure that the impeller and the pump body, pump cover on both sides of the gap between the equal, allowing paper pad to adjust the gap. Pump seal in the form of sub-filler and single-ended mechanical seal two, pump and motor together in a common base. W-type two-stage vortex pump is used to suck water and physical and chemical properties similar to the water used in the liquid temperature should not exceed 80 ℃, commonly used in boiler feed water. In the shipbuilding, textile, chemical, metallurgy, machinery manufacturing, aquaculture, fixed fire regulator: heat exchange units, agricultural remote irrigation and other departments have a wide range of applications, the following for everyone to share W-type single-stage cantilever vortex pump overview and Features. W single-stage cantilevered vortex pump - Product Overview W-type single-stage cantilevered vortex pump - Features 1, W-type vortex pump for conveying temperature from -20 ℃ ~ +80 ℃, viscosity is not greater than 5. E, non-corrosive and corrosive liquids without solid particles. Head range: from 15 meters to 132 meters Flow range: from 0.36 meters 3 / hour to 16.9 meters 3 / hour 2, W-type vortex pump flow components for the HT20-40, cast aluminum and 1Cr18Ni9Ti or Cr18Ni12M02Ti four. (Denoted by material code H, J, B and M, respectively) 3. W-type vortex pump seal in the form of soft packing seal and single-end mechanical seal. Except for WB and WM pumps, the single-end mechanical seal pumps are shipped with a soft packing seal. If users need other types of shaft seals to be specified when ordering. 4, W-type vortex pump direction of rotation: from the direction of the pump to the motor for counterclockwise rotation 5, W-type vortex pump a total of ten models: specifically 20W-20,25W-25,32W-30,40W-10, 50W-45, 50W-45, 65W-50, 20W-65, 25W-70, 32W-72, 40W-90. All single-stage cantilever vortex pump W-type vortex pump The pump has a small size, light weight, elegant appearance, W-type vortex pump easy maintenance features, suitable for chemical, petroleum, textile, power and other industrial and mining water , Boiler feed water, heating and water supply, high-rise buildings, fire fighting, water circulation in addition to thermal cycling, manufacture of frozen sunstroke drinks and canteen, food and beverage utensils disinfection of high pressure water supply and other widely used. The pump maximum flow of 14.4m3 / h, the minimum flow rate of 0.7m3 / h; maximum lift of 105m, the minimum lift is 20m; supporting power: maximum 11kW, a minimum of 0.75kW; speed are 2900r / min. Guangzhou IFAT China Water Show article belongs to the building industry interconnect (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: gogoing (QQ / micro-channel: 181 817 456) starting: http : //beng.liuti.cn/ (Service Hotline: 400-6030-811)