Novice decoration guide: the identification of decoration process
Brush wall
1 Before scraping the wall, scrape off some water putty on the wall and the ceiling and do the patching.
2 Once again 108 plastic two times putty primer paint paint twice (Nippon Paint 3 in 1 half light) Ceiling Yongli Li super white
3 Pay attention to the amount of water required for latex paint, Nippon 3in1 watered 5%,
4 Each brush on the wall requires the owner to check it.
Bag cover
1. Remove the original door frame, large core board substrate, slate wood veneer, and beech wood solid door line. Door line width is not more than 55mm, thickness is not more than 10mm.
2. Paint: Polyester varnish 3 times.
3 Barrier or kraft paper between the wall and door pockets, dumb mouth acceptance criteria
l requires horizontal and vertical, ±1mm within 2m, each part of the exposed part of the chamfer 1 × 45 °, all angles must rely on square
2 Plumb the vertical degree on the door cover to check the verticality
Baomen
1. Multi-layer board pressing, edge-sealing, flat panel molding (door size not more than 1000mm
Construction acceptance paint latex paint wooden door
Measuring Tape,Smart Measuring Tape,Mini Measuring Tape,Retractable Measuring Tape
Shangqiu Hengli Measuring Tools Co.,Ltd , http://www.henglimtools.com