Manual pump maintenance and care

Pump】 【Asian pump manual pump with light body, suction pumping oil easy, easy to install and durable and so on. The service life of the instrument lies in the routine use and maintenance. The correct maintenance method can effectively extend the service life of the instrument. The following Xiaobian to introduce to you how to maintain and maintain the manual pump. Manual pump maintenance and care 1, the pump often keep clean the ministries, and the valve around the plunger should not have dirt and dust. 2, strictly observe the safety precautions. 3, working fluid for the kinematic viscosity of 20-28 centistokes, such as YB - N32 hydraulic oil. Prohibit the use of alcohol, water, glycerin, sesame oil, brake fluid, general engine oil for the working fluid. 4, the working fluid must be 120--160 mesh filter oil filter clean. 5, should be used gently, without bump phenomenon. Pressure bar to tighten, so as not to damage the threaded buckle. 6, when not in use, non-painted surface coated with a layer of petroleum jelly to prevent rust. 7, should be loaded into the box when not in use, stored in a dry, temperature suitable room. 8, pay special attention to the long-term use of hose. Easy to produce aging, so that the intensity is reduced, should regularly check the regular replacement Extended Reading: Motor Top Ten Brands Guangzhou World Expo China Construction Water Exhibition pump manufacturers ranked ptc exhibition This article belongs to Industrial Internet (Xiamen) Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps network editor: gogoing (QQ / micro-channel: 181 817 456) starting: http: //beng.liuti.cn/ (hotline: 400-6030 -811)