How to clean and maintain crystal lamps

The decoration of the Love Nest has finally been completed, but maintenance and maintenance in daily life is also a very important job. The following small series teaches you how to clean and maintain the crystal lamp.

How to clean and maintain crystal lamps

1. Wipe the crystal beads: When rubbing the beads, be sure to have a soft cloth dipped in the diluted water of the detergent, gently wipe the front side of the crystal beads at the same time (when wiping, do not pinch the beads to pull down, so as not to break the beads string).

2. Maintain the balance of the rose: If you want to remove all the beads, clean the large lamps, pay attention to the balance of the roses when you remove the beads, do not remove the side and then remove the other side to cause the slope of the rose, resulting in rose or outside The frame is deformed; it should be removed before and after.

3. Wipe bracket accessories: When wiping the brackets and accessories, do not touch the water with soft cloth, especially alcohol, so as not to damage the protective film outside the plating layer and affect the surface gloss effect of the lamp holder.

4. Pay attention to safety: When wiping the lamp holder, cut off the power supply; the bulb should be removed and wiped clean before being installed; the bulb should be moderate when it is screwed in, too loose to cause poor contact; too tight may screw the bulb, think Crystal lamps make the most of their effects. It is best to choose a regular transparent bulb instead of a matte or colored bulb.

5. Replace the accessories at the right time: find the connection buckle of the beaded rust and discoloration, one is not beautiful, the second is easy to be brittle, it is best to change it by the way; if the bead string is found, it should be filled in time.  

3D Panel Fence

3D Panel Fence

3D Panel Fence,3D Mesh Fence,3D Wire Fence,3D Wire Mesh Fence

HeBei Bosen Metal Products Co.,Ltd , https://www.bosenfence.com