Brief Discussion on Heat Loss of External Thermal Insulation Composite Wall
Phenolic insulation board and using other insulation materials made of external insulation wall, should follow certain design requirements and thermal energy in construction designed to ensure that the effect of external insulation and play the role of the material.
To ensure that the base layer and adhesive from freezing damage, the inner surface temperature of the insulation layer should be higher than 0 deg.] C. Exterior thermal insulation system shall outer door covering the hole, and the thermal bridge closed balcony parapet. Outer door frame openings do compared with the thermal insulation made, external insulation wall increases the average heat transfer coefficient of up to 70% heat loss of the electric air conditioner thermal bridge pallet balcony parapet and is quite large. for mechanical fixing wire EPS The outer wall insulation system of the grid plate should consider the thermal bridge effect of the fixing parts and the supporting parts.
The sealing and waterproof structure design of the external insulation should be well ensured that the water will not penetrate into the insulation layer and the base layer; the horizontal or inclined pick-out parts and the parts extending below the ground should be waterproofed, and the equipment installed on the external wall insulation system or The pipe should be fixed to the base and sealed and waterproof.
Chunlei Quntification Co.,Ltd , https://www.hychunleitools.com