The hood is an essential kitchen tool for modern kitchens and is used very frequently. However, long-term use of the range hood will make the range hood full of oil. If the hood is not cleaned in time, it will affect the use of the hood, so that the soot is not easily discharged. That is to affect the life of the hood and endanger the health of the housewife. Therefore, the range hood needs to be cleaned regularly. If you feel that it is very troublesome, you can buy the boss to remove the washing and hood, remove the high-efficiency grease, and remove the inner cavity. Now let's share with you the tips for cleaning the hood.

Most people are used to cleaning and cleaning the range hood, which is a waste of time and easily damages the machine. A cleaning method that does not require disassembly of the machine and is time-saving and labor-saving is now introduced.

1. Take a plastic bottle (a variety of beverage bottles that can be pinched by hand), poke more than 10 small holes on the cover with a sewing needle, then put a proper amount of cleaning essence, then add warm water Shake evenly.

2. Start the range hood, and spray the cleaning liquid to the part to be washed with a plastic bottle filled with cleaning essence. At this time, it can be seen that the oil and dirty water flow into the oil storage hopper together with the overflow.

3. After the cleaning solution in the bottle is used up, continue to prepare and repeat the cleaning. Until the dirty water that flows out becomes clear, depending on the degree of fouling, it can be washed clean after 3 times of cleaning.

4. If a fan cover is installed outside the fan blade, the mesh cover should be taken first to enhance the washing effect.

5. Use a rag to clean the area around the suction port, the surface of the case, and the lamp cover.

Cleaning of the hood filter hood:

1. Unscrew the screws that secure the grille.

2. Soak the removed filter cover in warm water of a neutral detergent for 5-10 minutes.

3. (Clean the dirt in the filter pores with a soft plastic brush and dry with a dry rag.

4. After installation, check if the oil path of the appliance is smooth and the seal on the volute can be sealed.

Let's recommend a boss's side suction free wash hood

l The inner cavity is self-cleaning, and the oil molecules that accidentally enter the inner cavity cannot adhere and quickly flow into the oil cup.

l The inner layer is made of A++ integrated into the net net, which separates most of the grease and cleans the inner cavity.

l Concealed large oil cup, the smoke machine is integrated, the oil collection process is not exposed, and the waste oil of the 4 heavy oil passages inside and outside can be collected.

[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " Cabinet industry, the loss of the sale, the product is the bean curd! ! ! 》 , want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]

DUPLEX STAINLESS STEEL

Duplex Stainless Steels Available

Yuhong Group supplies LDX2101, 2205, Ferralium 255, Zeron 100 and LDX2507 in the form of plate, sheet, strip, bar, pipe, tubing, pipe fittings, flanges and weld wire.

Duplex Stainless Steel Overview

Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.

Today, modern duplex stainless steels can be divided into three groups:
Lean Duplex such as LDX2101
Standard Duplex such as 2205, the work-horse grade accounting for more than 80% of duplex usage
Super Duplex such as Ferralium 255 and Zeron 100 and LDX2507

Of the duplex grades, duplex 2205 is the most widely used. However, the super duplex steels like Zeron® 100 and LDX2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean duplex 2101 is available as an economic alternative to 300 series stainless steels.

What are the Characteristics of Duplex Stainless Steels ?
Very good resistance to uniform corrosion
Very good resistance to pitting and crevice corrosion
High resistance to stress corrosion cracking and corrosion fatigue
High mechanical strength
Good sulfide stress corrosion resistance
Good abrasion and erosion resistance
Good fatigue resistance high energy absorption
Low thermal expansion
Good weldability

In what Applications are Duplex Stainless Steels® used ?
Oil and gas equipment
Offshore technology
Seawater desalination plants
Chemical industry, especially when handling chlorides
Flue-gas cleaning
Desalination plants and seawater systems
Pulp and paper industry
Cargo tanks and pipe systems in chemical tankers
Firewalls and blast walls on offshore platforms
Bridges
Storage tanks
Pressure vessels, reactor tanks, and heat exchangers
Rotors, impellers and shafts

Duplex Stainless Steel Heat Exchanger Tube

Duplex Stainless Steel Heat Exchanger Tube,Duplex Heat Exchanger Tube,Duplex Metal Heat Exchanger Tube

YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com