Hardware purchase tips
1. Hinges: The number of kitchen door switches is up to several thousand times, and the advantages and disadvantages of door hinges are very important. Practice has proved that, according to the nature of the use of kitchen cabinets and the accuracy of the door arrangement, plus the weight of the kitchen door itself, it is difficult for domestic hinges to meet the quality requirements of kitchen cabinets. It not only needs to accurately connect the cabinet and the door panel, but also bears the weight of the door panel alone, and the number of times the cabinet door is switched tens of thousands of times, and the consistency of the door arrangement must be kept unchanged, otherwise it may be after a period of time Front and back.
2. Drawer guide rail: The guide rail is one of the important hardware in the kitchen cabinet hardware. Its importance is second only to the hinge. In comparison, the advantages and disadvantages are not distinguished by the appearance and the way of use. The main difference lies in the differences in materials, principles, structures, equipment, production processes, etc. As long as you pay a little attention, you can pull the drawer to the truth. Due to the special environment of the kitchen, domestically produced slide rails are generally difficult to meet the requirements. Even if it feels good in the short term, it will be difficult to push and pull if it takes a little longer. Therefore, in order to ensure that the drawers are pushed and pulled for a long time, we should choose imported brand cabinets with superior performance.
3. Skirting board: It is often overlooked. In fact, the first problem with the kitchen cabinet may be it. Because it is closest to the ground, if the ground is very moist, it is likely to swell and mold. The skirting board has two kinds of wooden skirting boards and matte metal skirting boards. Wooden skirting board manufacturers generally use the corner scrap left when the cabinet is used, and the cost is low. However, because the skirting board is very close to the ground, the wooden material is easy to absorb water and tide, and the water vapor will rise along the skirting board to endanger the entire cabinet.
4. Pulling baskets: The items in the kitchen are the most frequently contacted by us every day. The utensils in the kitchen are also the most varied in daily life. The three meals a day are indispensable for the entrance and exit of the kitchen, and the movement of the pots and pans is inevitable. move. How to establish a good living order in such a frequently moving space is an annoyance faced by many families. And this kind of trouble can only be solved by pulling the basket - this broad-minded mind, to put all kinds of items in his arms, without any complaints. The basket has a large storage space, and can reasonably divide the space so that various items and appliances are available. Maximize the use value. According to different purposes, the basket can be divided into a stove pull basket, a three-sided pull basket, a drawer pull basket, an ultra-narrow pull basket, a high-deep pull basket, a corner pull basket and the like.
5. Steel pumping, cutlery disc: steel pumping, cutlery disc size is accurate, standard, easy to clean, not afraid of pollution, no deformation, for the maintenance and use of kitchen cabinet drawers, it has an irreplaceable role, long ago for Germany Kitchen cabinet companies in developed countries such as the United States and Japan are widely used. Therefore, when you have roughly observed the appearance of the kitchen cabinet, you should open each drawer and take a look. If you use steel pumping and knife and fork combination, the cost of the product is higher, the cabinet combination is more standardized, and vice versa. Drawers are less expensive. Steel pumping and cutlery discs are also imported and made in China, mainly on the rail and surface treatment.
6. Water basin: It is an object that is used frequently in the kitchen, so its choice is also very important. Most of the common basins are stainless steel, artificial stone, ceramics and stone products, depending on the owner's preference and the overall style of the kitchen. If the style of the kitchen is more fashionable and avant-garde, it is more suitable to use stainless steel basins. This choice is not only because the metallic texture of the stainless steel material is quite modern, but more importantly, the stainless steel is easy to clean, light in weight, and also has the advantages of corrosion resistance, high temperature resistance, moisture resistance, etc., in line with the quality of life of modern people. Claim.
7. Faucet: The faucet can be said to be the most intimate part of the kitchen, but its quality is often overlooked when shopping. The faucet proved to be the most problematic place in the kitchen. If you use a low-quality inferior faucet, there will be water leakage, and the untimely consequences will be very serious. Therefore, you should pay great attention to the quality of the product when purchasing. At the same time, the high-quality faucet is the embodiment of technology, and the requirements for the craft are extremely high, which just meets the aesthetic pursuit of many fashion people's quality of life. A number of factors have made cabinet makers more cautious about his choices.
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com