Why the boiler is not warmer
As the floor heating gradually becomes the mainstream product of our home heating system, the floor heating products on the market are increasing, and the wall-warming floor heating is one of them. If the boiler is not warm , what should we do? Today we will take a look at the relevant information on the heating of the boiler .
Wall-hung boiler heating is not hot, the reasons 1 , the lack of hot water, the pressure is not enough to warm the working pressure can not be less than 0.6MPa, the pressure is lower than 0.6MPa when the floor heating system can not work, resulting in warm and not hot, need to re-hanging furnace Re-injection pressure to not less than 0.6MPa. It is normal for the pressure to always drop when you first use the floor heating system because the gas in the system needs to be drained. However, if you continue to use it for a long time, you must ask a professional to investigate and find out the reasons for repairs.
Wall-hung boiler is not warm, reason 2 , the length of the pipe is too long to warm the coil length is required, not how long the disk is to be long, generally a loop of floor heating coil can not exceed 100 meters, and within the same manifold The difference between the lengths of the two loops should not exceed 20 meters, otherwise it will lead to uneven hot water distribution, resulting in warm and hot.
Wall-hung boiler heating is not hot, reason 3 , due to differences in water quality, some areas of the floor heating after a long time, the floor will produce heat scale, blocking the floor heating coil, resulting in warm, not hot, this time we must ask the professional warm Construction workers clean. In order to avoid this situation, users are advised to install a simple water purification system when installing water to warm the floor to prevent the floor heating coil from being clogged with scale.
Wall-hung boilers are not warm, and the reason is that the water pressure inside the boiler is too low to reach the standard for starting. In this case, the boiler will automatically alarm to pressurize.
Wall-hung boilers are not warm, and the reason 5 , wall-hung boilers and floor heating areas do not match. At the time of purchase, it is necessary to recognize the heating area. It is recommended that the area of ​​the boiler be better than the actual area of ​​about 80 square meters. The so-called big horse-drawn car is a good guarantee.
Wall-hung boiler is not warm, reason 6 , floor heating tube coil length is too long. If it is planned to install a wall-hung boiler, it is necessary to negotiate with the warm-installing company in advance. It is recommended that each pipe requires about 60 meters. If it is too long, it will indirectly increase the heating effect, and the indoor heating will be too slow and cause no heat.
Wall-hung boilers are not warm enough. Reason 7 : The pressure of natural gas or gas is not enough. This requires consulting with gas companies to increase the pressure of air supply.
The warmth of the boiler is not warm , I hope to help you, more decoration information, do this site, so stay tuned.
Warm
Ring-Lock Scaffolding
A support system for construction, owns advantages of both ring-lock scaffolding and shoring tower.It is in the development direction of new type scaffolding.
It is widely used in buildings, bridges, tunnels etc.
Here comes our 5 types of Scaffolding systems:
- Cup lock Scaffolding(C-Lock Scaffolding)
- Ring lock Scaffolding
-Kwistage Scaffolding
-H-frame Scaffolding
-ID15 Scaffolding Tower, this type Scaffolding is the most widely used in construction, such like bridge.
-Whole Aluminum Scaffolding
Ringlock Scaffolding,Ringlock Aluminium Scaffolding,Ringlock Scaffolding Components,Ring Lock Scaffolding Parts
HENGSHUI PIONEER IMP & EXP TRADING CO ., LTD , https://www.hspioneer.com