Wall decoration note Do not make your home wall pock face
Wall decoration is the first step in home decoration. The wall surface is well treated and is beneficial to the next renovation. The quality of the wall surface construction directly affects the quality of the subsequent home decoration and directly affects the entire home environment and home improvement style. Wait. Memorize the wall construction process and don't let your wall become pockmarked.
First, how to choose the wall decoration materials
1, paint attention to environmental protection
The best choice of paint products water-based paint, can be diluted with water, environmental protection performance is much better than oil paint, construction is also more convenient. After the paint brush is applied, it is necessary to pay attention to the dryness. Do not open the window while waiting for the dryness of the wall to prevent the water vapor from outside the window from invading the paint and the wall.
2, wallpaper pattern to be good
When the patchwork is applied, the pattern and the back patchwork are matched so that the top and bottom patterns match. After careful attachment, carefully squeeze out the bubbles under the wallpaper. Small bubbles can be concentrated into one big bubble and squeezed out. In order to prevent wallpaper and wall cloth from getting wet, you can apply a layer of moisture-proof paint on the brush and brush it until it is dry. Clean the surface of the wallpaper with a dry rag.
3, before the tiles to be soaked in water
Tiles must be soaked in clean water for more than two hours before they are affixed. Tiles should not be bubbling and should be taken out for drying. When sticking and sticking, it encounters pipelines, lighting switches, and supporting devices for bathroom equipment. It must be cut and matched with the entire brick cover. After affixing the tiles, the surface of the tile is wiped with a cotton thread and then wiped with a white grout or caulking agent.
Second, the wall decoration construction process
1, the basic treatment
After the completion of the hydropower project, there will be various cracks and marks on the wall. Basic treatment needs to fill these gaps. Fill the gaps with cement and smooth them to ensure that there are no uneven areas on the walls for the subsequent construction and aesthetics of the wall effect.
2, solidified base
After the foundation treatment of the wall is complete, the base layer is cured, and the whole wall is painted with the interface agent to achieve the purpose of making the wall more sturdy and prevent the wall from cracking in the future.
3, check the flatness
Use a large wattage lamp and leveling tool to check the flatness of the wall to see if there is any bulge or dent, and if so, you need to wear out the bulge or fill it in. Check again after processing to ensure the flatness of the wall.
4, the effect of construction
After the basic treatment, solidification and leveling are all inspected, the effect of the wall surface can be applied, ie, wall decoration such as affixing, brushing or wallpapering. Steps should also be taken when carrying out these wall decorations so as not to affect the final effect of the wall and the future residence.
Wall decoration wall tile wall paint wall paint wall construction
Solar Controller,Solar Charge Controller,Solar Intelligent Controller,Solar Tracker Controller
Fuzhou Mei Li Cheng Imp&Exp Co., Ltd , https://www.mlc-solar.com