Valve material and connection
The valve is a control component in the fluid delivery system and has functions such as cut-off, regulation, diversion, prevention of backflow, regulation, shunting or overflow relief. Valves for fluid control systems range from the simplest shut-off valves to the extremely complex self-control systems available in a wide variety of sizes and sizes. Valves can be used to control the flow of various types of fluids such as air, water, steam, various corrosive media, mud, oil, liquid metals, and radioactive media. The connection between the valve and the pipe is an important parameter. According to this classification:
1. Threaded connection: The valve body has internal or external thread and is threadedly connected to the pipe.
2. Flange connection: The valve body is flanged and connected to the pipe flange.
3. Welding connection: The valve body has a welding groove and is welded to the pipe.
4. Clamp connection: The valve body has a clamping mouth and is connected with the pipe clamp.
5. Card sleeve connection: Connect with the pipe with a ferrule.
6. Clip connection: The connection form in which the valve and the two pipes are directly clamped together by bolts.
Valve body material:
1. Metal material: Parts such as valve body are made of metal material. Such as cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, lead alloy, titanium alloy, Monel alloy.
2. Non-metallic materials: parts such as valve bodies are made of non-metallic materials. Such as plastic, ceramics, enamel, glass steel and so on.
3, metal lining: the shape of the valve body is metal, the main surface of the internal contact with the medium is lining, such as rubber, lining plastic, lining ceramics.
Concerned about surprises
Label: Material and connection of the valve
Previous: Development and use of butterfly valves Next: Six factors affect spring fatigue strength
You may have seen brick veneer tile in home fireplaces, backsplashes, gates, commercial buildings, residential developments, and schools. It is popular for its aesthetics, unique design and long-lasting durability.
Thin Brick Tile can replace tiles, wood or aluminum siding. Brick Veneer Exterior Wall tile can be easily installed on the outer wall without increasing the weight and cost of the concrete foundation.
Faux Brick Veneer size: 20x240mm, 45x145mm, 60x225mm,40x250mm,60x240mm...
Contact us to learn more about color, size and texture
How to install thin brick wall
1. The construction wall must be clean, level and reasonable in structure to receive adhesives and bricks.
2. Select from a variety of color combinations to arrange the best results before installing the wall.
3. When installing, first put the corners, then stick the plane, after the adhesive is full, press the adhesive to squeeze around the cultural bricks to avoid the empty bricks in the installation.
4. Depending on the construction needs, wall veneer brick can be easily cut with a tile saw or an angle grinder.
5. Leave the seam treatment, fill the bricks, remove the excess mortar, and try to avoid the mortar staining the brick surface.
We offer pre-mixed to thin brick avoid color density and reduce scrap on the site.
Thin Brick Tile,Thin Brick Wall,Brick Veneer Exterior Wall,Faux Brick Veneer,Brick Veneer Tile
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com