Tianjin polymer reinforced mortar manufacturer, two-component C50 high-strength repair material
2023-11-15 07:07:35
The durability is synchronous with concrete. It consists of two components, imported emulsion and inorganic powder. It is a new type of concrete repairing material with both polymer material and inorganic material durability. It has high compressive strength and rapid curing. , good bonding performance; good water retention and crack resistance Zhengxiang Z30 polymer repair mortar (two-component)
First, Z30 polymer repair mortar use
1. Used for repair and reinforcement of concrete surface defects, smoothing of uneven surface;
2. Thickening of the protective layer, repair of the old concrete surface, etc.;
3. This product is a polymer mortar used for “road and bridge repair leveling reinforcementâ€
4. Improve the durability of concrete, prolong the service life of concrete, and prevent the erosion of concrete by acid, alkali, salt, CO2, SO3 and other media with water as carrier;
5. The rust-preventing component has an anti-corrosion function with low chloride ion diffusivity, effectively prevents steel corrosion and deicing salt, freeze-thaw damage; and has anti-corrosion function with low chloride ion diffusivity;
Second, Z30 polymer repair mortar features
1. The durability is synchronous with concrete. It consists of two components, imported emulsion and inorganic powder. It is a new type of concrete repairing material that has the adhesiveness of polymer materials and the durability of inorganic materials.
2. High compressive strength, rapid curing and good bonding performance;
3. Has good water retention and crack resistance, high alkali resistance, UV resistance;
4. Easy to operate, it can be constructed in wet base, healthy and environmentally friendly.
Third, Z30 polymer repair mortar performance
The compressive strength test method implements GB/T17671 "Cement mortar strength test method";
The measurement of tensile bond strength was performed in JC/T547 "Ceramic Wall Tile Adhesive".
Fourth, Z30 polymer repair mortar usage
1 Grassroots requirements and handling:
· The surface of the base layer should be smooth, rough, clean, free of oil, and free of floating ash. There should be no sanding, empty drums, cracks, etc. Rinse with high pressure water and keep it moist before construction, but no water.
· When the interface adhesive force is extremely high, it can be pre-painted with Zhengxiang high-strength interface adhesive.
2 Material preparation:
· Powder: The emulsion is placed at a mass ratio of 6:1 (volume ratio is 3:1);
· Pour 80% of the actual amount of the emulsion into the powder and mix well. Then pour the remaining 20% ​​emulsion gradually and stir evenly without agglomeration. The prepared slurry should be used up within 1 hour.
· If it is found that the high-strength repairing material has been thickened during high-temperature construction in summer, a small amount of emulsion may be added and stirred to continue use.
3 Construction:
· Evenly spread the Z30 slurry on the surface of the damp concrete base (powder: emulsion is prepared according to the mass ratio of 2:1), and spread while brushing;
· The construction area should not be too large. It should be staggered and divided into blocks. The area should not exceed 10m2. The interval between staggered construction should not be less than 24 hours. When layered construction, the positions of the seams should be staggered from each other;
· Z30 should be pressed immediately after construction, and should be smoothed once, it is not suitable to repeatedly press. In case of air bubbles, it should be punctured and compacted, and the surface should be dense;
· When the thickness of the surface of the façade or top surface is greater than 10mm, it should be layered. The thickness of each layer of the surface should be 5~10mm, and the lower layer can be constructed when the previous layer is dry.
High-strength polymer mortar (two-component), Z30 polymer repair mortar 1.7 tons is one party
High-strength polymer mortar (two-component), Z30 polymer repair mortar 1.7 tons is one party
High-strength polymer mortar (two-component), Z30 polymer repair mortar 1.7 tons is one party
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
First, Z30 polymer repair mortar use
1. Used for repair and reinforcement of concrete surface defects, smoothing of uneven surface;
2. Thickening of the protective layer, repair of the old concrete surface, etc.;
3. This product is a polymer mortar used for “road and bridge repair leveling reinforcementâ€
4. Improve the durability of concrete, prolong the service life of concrete, and prevent the erosion of concrete by acid, alkali, salt, CO2, SO3 and other media with water as carrier;
5. The rust-preventing component has an anti-corrosion function with low chloride ion diffusivity, effectively prevents steel corrosion and deicing salt, freeze-thaw damage; and has anti-corrosion function with low chloride ion diffusivity;
Second, Z30 polymer repair mortar features
1. The durability is synchronous with concrete. It consists of two components, imported emulsion and inorganic powder. It is a new type of concrete repairing material that has the adhesiveness of polymer materials and the durability of inorganic materials.
2. High compressive strength, rapid curing and good bonding performance;
3. Has good water retention and crack resistance, high alkali resistance, UV resistance;
4. Easy to operate, it can be constructed in wet base, healthy and environmentally friendly.
Third, Z30 polymer repair mortar performance
The compressive strength test method implements GB/T17671 "Cement mortar strength test method";
The measurement of tensile bond strength was performed in JC/T547 "Ceramic Wall Tile Adhesive".
Fourth, Z30 polymer repair mortar usage
1 Grassroots requirements and handling:
· The surface of the base layer should be smooth, rough, clean, free of oil, and free of floating ash. There should be no sanding, empty drums, cracks, etc. Rinse with high pressure water and keep it moist before construction, but no water.
· When the interface adhesive force is extremely high, it can be pre-painted with Zhengxiang high-strength interface adhesive.
2 Material preparation:
· Powder: The emulsion is placed at a mass ratio of 6:1 (volume ratio is 3:1);
· Pour 80% of the actual amount of the emulsion into the powder and mix well. Then pour the remaining 20% ​​emulsion gradually and stir evenly without agglomeration. The prepared slurry should be used up within 1 hour.
· If it is found that the high-strength repairing material has been thickened during high-temperature construction in summer, a small amount of emulsion may be added and stirred to continue use.
3 Construction:
· Evenly spread the Z30 slurry on the surface of the damp concrete base (powder: emulsion is prepared according to the mass ratio of 2:1), and spread while brushing;
· The construction area should not be too large. It should be staggered and divided into blocks. The area should not exceed 10m2. The interval between staggered construction should not be less than 24 hours. When layered construction, the positions of the seams should be staggered from each other;
· Z30 should be pressed immediately after construction, and should be smoothed once, it is not suitable to repeatedly press. In case of air bubbles, it should be punctured and compacted, and the surface should be dense;
· When the thickness of the surface of the façade or top surface is greater than 10mm, it should be layered. The thickness of each layer of the surface should be 5~10mm, and the lower layer can be constructed when the previous layer is dry.
High-strength polymer mortar (two-component), Z30 polymer repair mortar 1.7 tons is one party
High-strength polymer mortar (two-component), Z30 polymer repair mortar 1.7 tons is one party
High-strength polymer mortar (two-component), Z30 polymer repair mortar 1.7 tons is one party
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztongvalve.com