The difference between light steel and heavy steel

There is really no uniform standard for determining the structure of heavy steel and light steel structure. Many experienced designers or project managers often cannot fully explain it, but we can consider and judge with some data:

High-rise steel structure

1. Lifting weight of the plant: 25 tons or more, which can be considered as heavy steel structure.

2, the amount of steel per square meter: greater than or equal to 50KG / M2, can be considered a heavy steel structure.

3, the main component steel plate thickness: greater than or equal to 10MM, light steel structure used less.

In addition, there are some reference values: such as the cost per square meter, the maximum component weight, the maximum span, the structural form, the high height, etc. These can provide empirical data when judging whether the plant is heavy steel or light steel. Of course, many buildings are now Light and heavy steel are available. But there are some that we can say with certainty that it is heavy steel: eg petrochemical plant facilities, power plant buildings, large-span stadiums, exhibition centers, high-rise or super high-rise steel structures.

In fact, there is no heavy steel in the national norms and technical documents. In order to distinguish the steel structure of light-duty houses, it may be more appropriate to call the general steel structure “Pugang”. Because of the wide range of ordinary steel structures, it can contain a variety of steel structures, regardless of the size of the load, and even the light steel structure, the light steel structure technical regulations only specify some more specific for its "light" characteristics. Content, and the scope is limited to single-story portal frames.

Light steel is also a relatively vague term, and generally can have two understandings. One is the eleventh chapter of the current "Code for Design of Steel Structures" (GBJ 17-88) "Light steel structure of round steel and small angle steel", which refers to round steel and less than L45*4 and L56*36*4. The light steel structure made of angle steel is mainly used for small structures that are not suitable for reinforced concrete structures when the steel is lacking. It has been basically not used, so this steel structure design specification has basically been removed. The other is a single-layer solid belly-type rigid frame structure with a light roof and a light exterior wall (which can also be conditionally used for external walls) as stipulated in the Technical Specification for Steel Structures for Lightweight Houses of Portal Frames. The light weight here mainly means that the enclosure is made of lightweight materials. Since the former one has been canceled quickly, the current light steel meaning mainly refers to the latter.

It can be seen that the distinction between light steel and heavy steel is not the weight of the structure itself, but the weight of the enclosing material is still the same, and the structural design concept is consistent.

Black Single Hole Basin Faucet

What does single hole faucet mean?

Unlike a three-hole mounting configuration, a single-hole mounting configuration combines the spout and faucet's handle or handles through the mounting hole. This faucet has two separate inlet tubes, one for hot water and another for cold water. Both fit down through the single-mounting hole.

What is a single-hole bathroom faucet?

Single-hole faucets provide more precise volume and temperature control. ... When you want to use a single-hole faucet on a basin with a three-hole installation layout, use an escutcheon, or a deck plate, to hide the other two holes.

Are black fixtures out of style?

It seems like the trend is proving popular: according to interior design bloggers at Lusso, sales for black faucets increased twelvefold in 2019 compared to chrome-plated fixtures. ... And black fixtures are having more than just a moment - they are here to stay.

Our company have gravity casting machines, CNC machines, grinding flats, high-precision measuring instruments and processing equipments. We also employ a large quantity of technical personnel and management personnel and a very professional sales team which will always respond to your queries immediately. Our products mainly are Basin Faucets, Kitchen Faucets, Shower Faucets and other sanitary ware accessories. Furthermore, we have already passed ISO9001: 2015. "Gain development by quality, Win customer by reputation" is always our aim while coordinated with our clients and has been leading us to the exportation of all over the world.

Black Single Hole Faucet, Single Hole Black Faucet, Matte Black Single Hole Faucet, Black Taps For Bathroom, Black Wall Mounted Bath Taps

Kaiping Jianfa Sanitary Ware Co.,Ltd. , https://www.jfsanitary.com