Five ways to keep piglets warm in winter
The function of piglets to regulate body temperature is not perfect, and the ability to stress cold is poor. The newborn piglets are in an environment of 13-24 ° C, and the body temperature drops by more than 1.7 ° C for 1 hour. Piglets are sparsely lit, have little subcutaneous fat, and have low cold resistance. To this end, piglets must be kept warm during the winter. At present, there are generally five measures for keeping piglets warm:
First, thick padding
Thick padding is a traditional method of heat preservation and is used in household pigs. The method is as follows: 10 cm thick bedding is applied on the first day, and 10-20 cm bedding is added on the next day, so that the thickness of the bedding is 30-40 cm, and the outer grass is nailed to prevent the grass from spreading. When the temperature is 10-15 ° C, the temperature of the bedding can reach 21 ° C or above. This method is economical and easy to implement, saving both labor and grass, keeping warm and moisture-proof. When using this method, the bedding should be replaced in time, dry and fresh bedding should be added to keep the column dry.
Second, the fire source heating
There are flue and charcoal stoves, and the flue has two types of above-ground flue and underground flue. When using coal and other fuels for heating, no matter which type of heating method is used, in addition to preventing fires, the harmful gases in the pens should be removed in time to prevent poisoning.
Third, infrared heat lamp
At present, infrared heat preservation lamps are widely used. The method is: using an infrared light bulb to hang on the guard frame lying on the piglet lying in the nursery rack or in the heat preservation room to warm the piglet, and adjust the hanging height of the infrared heat preservation lamp according to the temperature required by the piglet. The method has the advantages of simple equipment, good heat preservation effect and prevention and treatment of skin diseases. If a wooden fence or iron fence is used as the partition wall, the two litter pigs cannot share an infrared heat preservation lamp.
Fourth, piglet insulation board
The electric thermostat warm plate has a surface temperature of 26-32 °C. The product structure is reasonable, safe and energy-saving, easy to use, flexible temperature regulation, accurate temperature, suitable for large-scale factory pig farms.
Five, far infrared heating piglet incubator
The incubator is 100 cm long, 60 cm high and 50-60 cm wide. The far-infrared heating plate is connected to the temperature-control element and placed flat on the lid. The temperature of the incubator is adjusted according to the age of the piglet. In order to facilitate disinfection and cleaning, the lid can be removed, and the box material is made of waterproof material.
Wood Look Cermaic tile can not only maintain the real wood texture,but also overcome the shortages of real wood.Also it meets people's pursuing quality of life for high-end decoration.150*900mmm Matte finishing wooden texture tiles are available with Yellow,Beige,Grey and Brown color.which can be widely used in interior floor and wall in many palces like living room, dining room, bathroom and balcony and other commercial areas etc.
1. Wood look porcelain tiles are produced by 3D printing technology,which show the real effect of real wood.
2. Have good flatness and lower water absorption (less than 0.5%).
3. Wear-resistant and stain resistance.
Wood Grain tile,Wood look porcelain tile,Wooden flooring tile,Wooden flooring ceramic tiles,Floor wooden tiles
Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com