The choice of solid wood flooring and construction points to pay attention to

The solid wood floors currently on the market mainly include teak, beech, ash, birch, and high-grade imported timber. There are two types of solid wood flooring. One is a long-type wooden floor, the length is generally between 45cm and 90cm, the thickness is more than 1.6cm, the width is more than 6cm. It is not directly bonded to the ground. Below it must be a keel or a big core board. The Other is a short and thin type. It is directly bonded to the ground, and its quality requirements are mainly high degree of dryness and low moisture content.

When selecting materials, consider the ground conditions of the house, such as bungalows or building ground floor, due to the direct contact with the ground, high humidity, moisture treatment should be done, can choose to use camphor wood, Ash, because the wood is not easy to deform after moisture. The floor of the floor can be floor made of ash, beech, teak, fir, birch, etc. The pattern of the material should be beautiful, no knot knot, hard quality, no serious color difference, such as teak, beech, ash and so on. If the hardness of the material is low, significant scratches are caused by the impact of furniture or heavy objects during use, which seriously affects the decorative effect. When selecting the material, the moisture content of the wooden floor must be taken into account and it should be adapted to the indoor humidity.

At present, a large number of block-mounted wooden floor boards in the market are not only of good quality and excellent processing, but also have been dried, smooth and smooth, and the surface has been painted with high-grade paint. Its biggest advantage is that it is easy to install, and it is quickly installed with a positive connection.

Basically, there are two kinds of wood floor installation: one is to glue the floor glue directly on the concrete floor in the room, which is suitable for the ground to be flat and the small strips of parquet flooring; the second is to set up the wooden keel on the original ground and put the floor strips. Pinned to wooden keels, this is suitable for long wooden floors. The third type is the unpainted assembled wooden floor blocks. After the installation is completed, the machine needs to be ground with a sander, polished with sandpaper, then putty, and finally painted.

The floor must be flat, the mouth must be smooth and smooth, into the groove back and forth freely, there is no uneven between the floor, no cracks, the floor should be the same color, no obvious blind, if it is painted floor, it must wear Good degree, strong hardness, soft brightness, smooth and smooth. The inherent disadvantages of wood are that it swells and shrinks, its size changes greatly, it is easily scratched, moldy, and moth-eaten. To maintain its appearance for a long time, attention must be paid to maintenance. Waxing must be done regularly to keep the ground covered with a thin waterproof layer to prevent water. Partially impregnated flooring is not good for floor cleaning.

Nature floor del floor paint cement decoration furniture

2 holes basin faucet

kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets.com