"Carpentry" process and acceptance "carpentry" notes
What are the precautions in the acceptance and construction process? It is important to prepare for home improvement projects. Of course, we cannot ignore the woodworking process, let alone ignore it. Is the fourth step of home improvement, involving door and window production, furniture, etc., This is a very critical task, related to whether the furniture is easy to use and good-looking, from the choice of materials, construction must be strictly controlled, not to the effect.
Li Kemai Lighting   Jumei Indian Home Furnishing Museum
1, the material must be purchased in a formal place, avoid greed. The amount of wood accounting for 60% (about 35% of the price) should be 12% core board, 90 yuan / above price, quality is more secure. (The main material rejects 10% or 8PCT board).
2, the panel determines the appearance of furniture, so the principle of procurement ibid, the number of 30% of the appearance of the panel, the more expensive the better!
Before the woodworker enters the ground, the construction team leader must be familiar with seeing through the construction drawings:
(1) Put the horizontal line in front of the suspended ceiling and place it accurately, and determine the position according to the shape of the ceiling.
(2) The spacing of wood keel is 30-40 cm. Any gypsum board is a large surface cover. Leave 0.5CM between the board and the board, screw spacing 15-18 cm. Corners and corners should be perpendicular to the corners, finished with sandpaper.
(3) Do door covers and front doors to measure the wall size according to the maximum size of the wall. The door pocket correction must be vertical and not biased. The closing line should be strictly sealed according to the requirement of 45° angle, and the distance between the nails should be 20cm, and the pattern plate nail should be bevelled.
(4) Mixing water door, door cover, leaving 0.2CM between the line and the door.
(5) Install the door, leave 0.3CM between the door and the door cover, 0.6-0.8CM below the floor, and 10-12MM above the bathroom floor.
(6) do no wardrobe 60CM, closet requires horizontal and vertical corners, solid wood side to be flat, two-tiered Chinese fir, or a layer of belt line shadow sewing. Cabinet nails require nail caps.
(7) There are door wardrobes, low cabinets, shoe cabinets, wall cabinets, and squat doors with 1.5CM seams and seamless door seams with 0.3CM seams. All the front doors have no nail holes.
(8) Mixing water closet low cabinet, hanging cabinet, decorative cabinet front shut lines and board left 0.2CM seam, the door can not receive wood lines.
(9) The above wooden product panel is first brushed again to do the oil again, and then each process of the finished product is sanded again.
Home decoration woodworking acceptance work need to pay attention to what?
(1) Whether there is a broken phenomenon in the woodwork project. It should ensure that the surface of the decoration of the woodworking project is flat and there is no drum or breakage.
(2) The corner of the decoration is accurate. The normal corners are 90 degrees, with the exception of special decoration design factors.
(3) Whether the decoration decoration is tight and accurate. The correct decorative wooden parquet should be seamless or maintain a uniform distance.
(4) Whether the arc and roundness of the decoration are smooth and sleek. In addition to a single, a number of the same decorative decoration also ensure that the same shape.
(5) Whether the cabinet door switch is normal. When the door is open, it should be light and no noise.
(6) There should be no gaps in the fixed wall of the cabinet.
(7) Whether the decoration decoration structure is straight. Regardless of horizontal or vertical orientation, proper woodworking practices should be straightforward.
(8) Symmetrical decoration woodwork items are symmetrical.
(9) There is no repair in the decorative panel nails. Of course, this is the painter's job, but because of its presence in the woodworking project, it is mentioned here.
(10) Whether the corners of the decorative ceilings are smooth or not, and whether there are any obvious lines and distortions.
(11) Whether the skirt line is straight and accurate after decorating and decorating.
(12) After the decoration, the ceilings of toilets and kitchens, such as aluminum buckles and PVC buckles, are flat and have no deformation.
(13) After the decoration, the installation position of the door handle lock is correct and normal.
(14) Whether the bedroom door and other doors are open after decoration. When closed, the upper, left and right door joints should be tight, and the lower door gap should be moderate, generally 0.5 cm.
Construction Acceptance Notes Carpentry Furniture Decoration Home Door Price Home Furnishing Furniture Bedroom Door Plasterboard Ceiling Price Cabinet Door Kitchen Cabinet Door Bathroom Door Toilet Ceiling Material Bathroom Door Size Bathroom Size Toilet Ceiling Bathroom Design Bedroom Door to Bedroom Bedroom Bedroom Ceiling Style Bedroom Bedroom Door size decoration home bedroom lamp
Other Valve,Basket Filter,Stainless Steel Flange Filter,Welded Cast Steel Check Valve
Zhejiang Meide Machinery Co.,Ltd , https://www.meidemachinery.com