Piston Standard Hydraulic Cylinder for Ultra-Thin Scissor Lift

Technical Parameter

1, Single-acting pushing cylinder, its rodless cavity volume matches together with the volume of rod cavity of master cylinder.

2, High reliability with imported Parker/Hallite/Aston seals.

3, Double seals to avoid internal leakage.

4, The silence installed in the air venting hole can effectively prevent impurities getting into cylinder.

5, Threaded rod connector for easily installation.

6, Parameter:

Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
 
Management System
                 ISO9001                                ISO/TS16949                               IPR


Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.


Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.


Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.


Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation. 


FAQ

Q1: Are you a trading company or manufacturer?

A1: We are the manufacturer with Exporting License.

Q2: How long have you been in Hydraulic Cylinder industry?

A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.

Q3: How long is your warranty period?

A3: We offer 13 months warranty period after on board.

Q4: How long does it take to process orders?

A4: It usually takes 20-30 days to process. We don't have stock.

Q5: What's your cylinder PPM?

A5: 5000 PPM. We do 100% inspection before delivery.

Q6: Have you been exported to overseas?

A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.

Contact

Lena Li 

Tel: 86-535-6523027        Fax: 86-535-6528663

Website: www.fasthydraulic.com  www.yantaifast.com

Technical Parameter

1, Single-acting pushing cylinder, its rodless cavity volume matches together with the volume of rod cavity of master cylinder.

2, High reliability with imported Parker/Hallite/Aston seals.

3, Double seals to avoid internal leakage.

4, The silence installed in the air venting hole can effectively prevent impurities getting into cylinder.

5, Threaded rod connector for easily installation.

6, Parameter:

Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
 
Management System
                 ISO9001                                ISO/TS16949                               IPR


Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.


Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.


Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.


Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation. 


FAQ

Q1: Are you a trading company or manufacturer?

A1: We are the manufacturer with Exporting License.

Q2: How long have you been in Hydraulic Cylinder industry?

A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.

Q3: How long is your warranty period?

A3: We offer 13 months warranty period after on board.

Q4: How long does it take to process orders?

A4: It usually takes 20-30 days to process. We don't have stock.

Q5: What's your cylinder PPM?

A5: 5000 PPM. We do 100% inspection before delivery.

Q6: Have you been exported to overseas?

A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.

Contact

Lena Li 

Tel: 86-535-6523027        Fax: 86-535-6528663

Website: www.fasthydraulic.com  www.yantaifast.com

Double Bowl Handmade Sinks

Stainless steel sink is a best optimization for the kitchen use with best durability and adaptability. Stainless steel sink double is with double bowl on the sink, to provide the kitchen user more room to finish different cleaning jobs at the same time, and make job more organized with stainless steel sink with double . And its different installation ways like under mount, top mount, drop in, and apron front can satisfy your kitchen cabinet design needs. A good stainless steel sink can make your kitchen life more easy and with pleasure!

Double Bowl Handmade Sinks,Double Bowl Kitchen Sinks,Double Bowl Stainless Steel Kitchen Sinks,Double Sink Kitchen

Guangdong Huayou Hardware Products Co.,Ltd , https://www.gudsink.com