Operation procedure when installing FRP groove cover

FRP grating is also called composite slab, which is made of unsaturated polyester resin and made of non-alkali glass fiber as reinforcing material and refined by special process. It has the characteristics of light weight, high strength, corrosion resistance, non-magnetic insulation, bright color, and various styles. It is also called composite slab, which is based on unsaturated polyester resin. Alkali glass fiber as a reinforcing material, a glass fiber reinforced plastic product refined by a special process. It has the characteristics of light weight, high strength, corrosion resistance, non-magnetic insulation, bright color, and various styles. It can be used in acid and alkali corrosion, hot and humid rust areas, such as power generation, electroplating, marine operations, etc. Supporting anti-corrosion flat, sewage treatment, chemical, electroplating equipment supporting glass steel products, such as trench cover, overflow trough, etc.



Common types of trench cover: metal trench cover, concrete trench cover, glass fiber reinforced plastic trench cover. The application of these types of trench covers is also different depending on the occasion and environment used. In the previous chapters, the related knowledge, advantages, disadvantages, use cases, etc. of the FRP ditch cover are introduced in detail.

Preparation before installation: Due to the size of the mold for producing FRP grating plates, cutting is an essential step before being put into use. Cutting work is relatively simple, just a simple manual cutting tool or a small electric cutting tool for cutting.

Note: When cutting, try to keep the cutting surface and the cross-butting surface of the bottom FRP grating as consistent as possible, so that the perimeter of the GRP groove cover is kept closed.

Operation process during installation:

1. The glass fiber reinforced plastic groove cover is connected to each other by the same material of FRP fasteners and connecting pieces.

2. If there is a high requirement for the sealing property of the groove cover, it is necessary to use the corresponding adhesive.

3, pay attention to the size of the span and the number of brackets across the support, the overall stability should be based. Maintenance work is very simple, just a simple regular maintenance, usually more cleaning work.

Note: The whole plate size of the FRP ditch cover should not be too large, try to cut it into multiple pieces for assembly!
Http://news.chinawj.com.cn Submission:

Diamond Wire Saw For Stone

Diamond Wire Saw (referred to as wire saw) is formed by sintering and electroplating. The artificial diamond particles are consolidated on the metal steel body to make diamond beads, and then the beads are strung on the Steel Wire Rope. Through special molds and equipment, glue injection, injection molding, and fixation are performed to manufacture strip-shaped flexible diamond cutting tools. The emergence of Diamond Wire saw mining technology in stone mines is undoubtedly a revolution in stone mining. The technology for stone mining has wide adaptability, strong function, high efficiency, deep mining depth, and can be cut in various directions such as vertical, horizontal, and inclined planes, high yield, low comprehensive cost, safety and environmental protection, and no noise in wire saw mining. No dust and other advantages.

Cutting Wire for Stone,Diamond Saw Cutting Wire,Diamond Saw with Bead

Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com