Key points in the operation of the turner

The main points in working on the turner are:

1. Do not turn off the flame when the machine is prohibited from troubleshooting. Some operators have found that the tractor or the matching machine has a fault during the operation. For the convenience of the figure, it is easy to cause a safety accident when the engine is not extinguished.

2. It is forbidden to cut off the mechanical power of the working machine when the turning machine is transferred. When the tractor is transferred in the field, the power is not cut off, and it is easy to cause the trencher and the tiller blade, the harvester cutter, the planter opener, etc. to be damaged or injured when passing through the field, small ditch or other obstacles.

3. It is forbidden to turn over the water tank of the stacker. Since the water tank is often opened, the water tank must be shut down and cooled to open the lid. Many operators save the time for the water to cool down and make the water tank open. This will easily cause a large amount of crop leaves and dust to enter the inside of the tank, and as the cooling water flows through the water pump to reach the body and the cylinder head, it directly affects heat dissipation and causes the engine to overheat.

4. Do not use water to wet the radiator. When many operators put water in the water tank, first use a bucket of water to pour the water tank cover to lower the temperature, so that the heat sink is wet. When the water is added, the overflow water flows to the radiator. I don’t know that this will only add to the weight. The air passage between the radiators is small, and it is easy to be blocked by debris and dust. After the water is drenched, the dust will stick to the radiator and the air passage area will be quickly reduced or blocked. The heat dissipation effect is reduced, which causes the time for opening the water tank to be shortened, which affects the operation.

Global hardware network

Concerned about surprises

Label: Key points in the operation of the turner

Previous: Precautions for use of FM series-parallel resonant withstand voltage test device Next: Guided wave radar level gauge installation precautions

Nickel-based alloy wire owns good resistance to high reactive gases, caustic resistance medium and acid corrosion performance, and also owns high strength, good capability of shaping, hot and cold forming and welding deformation. Therefore it is widely used in petroleum chemical industry, metallurgy, atomic energy, ocean development, aviation, aerospace to solve the problem that general industry, stainless steel and other metals, non-metallic materials engineering corrosion problems could not be solved,it is a very important kind of corrosion resistant metal materials. Nickel based alloys are nickel based alloys that contain alloy elements and which can be resistant to corrosion in a number of media. To classify the chemical composition characteristics, mainly nickel, nickel copper alloy, nickel alloy, nickel chromium molybdenum (Nie Mutie) (iron nickel alloy), nickel chromium molybdenum (including Ni Cr Mo alloy and Ni Cr Mo Cu alloy) and nickel iron chromium (both iron nickel alloy) and other types of. Pure nickel welding wire ERNi-1 for welding of 200, 201 nickel alloy and nickel plated steel plate; steel and nickel dissimilar materials welding; steel surface surfacing.

Nickel Alloy Welding Wire\Welding Consunmables

Nickel Alloy Welding Wire\Welding Consumables

Nickel Alloy Welding Wire,Welding Consumables,Alloy C276 Materials,Inconel 600 Welding

Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com