Home decoration should focus on low-carbon environmental protection decoration process
In the minds of many consumers, it is always thought that "low-carbon" home furnishing must be equal to high-priced home improvement. This is not the case. Since “low-carbon†homes promote simplicity and less production, they naturally save a lot of materials and labor costs. In addition, resource recycling and reuse in the construction process can also significantly reduce material waste and save construction costs. In addition, low-carbon households seem to use more expensive materials on the surface, but due to the use of new energy-saving materials and new technologies, the actual use of materials is less, which also saves costs.
Low-carbon homes must first advocate the harmony between man and nature, and secondly, they must also focus on the integration of local culture and culture. Therefore, in the design of low-carbon homes, we must first consider adapting to the natural conditions of the geographical and other geographical conditions, and make full use of the effective space in the interior decoration design, do not recommend large demolition and construction, to avoid secondary waste, as much as possible in the original structure to create multi-functional Variable space.
2 Increase natural ventilation and lighting, save energyLow-carbon home decoration runs through the entire process from material purchase, home decoration design, decoration construction, etc. to full use of natural light, wind energy, solar energy, etc., draws materials locally, minimizes the use of artificial light sources and air conditioners, and reduces energy consumption, etc. The purpose of energy conservation and emission reduction.
Waste wood, furniture, the remaining PVC pipes, scaffolds, etc. are all excellent materials that can be recycled and turned into waste. As long as the vision is unique and the creativity is outstanding, it is also possible to create an innovative effect by using obscure old materials and save a lot of home improvement costs.
Second, the environmental protection decoration common mistakes 1 as long as ventilation can take away harmful substances"The ventilation after the decoration will be on the line for a few months." This is a typical palliative method. The harmful gas has a long incubation period. The incubation period of toluene and xylene is more than one year. The incubation period of formaldehyde, which is the most harmful, can reach 3-15 years. This is far from a problem that can be solved by ventilation for several months. The best practice is to do a full range of comprehensive governance.
Many owners think that using environmentally friendly materials is pollution-free. From the definition of environmental protection materials alone, environmental protection materials refer to the content of toxic and hazardous substances below a certain standard, but it is not absolutely absent. Similarly, if a lot of the same material is used in a room, it may also result in an additive effect. The indoor air quality did not meet the requirements and even exceeded the standards. Therefore, the amount of environmentally friendly materials should also be controlled within a certain range.
3 formaldehyde detection is equal to environmental protectionMany owners of the decoration of the environmental protection understanding is limited to formaldehyde, and formaldehyde is only a kind of pollution, there are stupid, xylene and other gas pollution, more radioactive elements with stone, and even a variety of household appliances, electronic equipment, office automation equipment, Electrical devices such as mobile communication devices also have electromagnetic radiation. Therefore, the real environmental protection home decoration is concerned with all aspects of the home.
Above all the contents of low-carbon green decoration, in order to have a comfortable and beautiful home, all aspects must pay special attention. If you want to learn more about decoration, please pay attention to this website decoration information channel
Entrance decoration restaurant decoration home decoration design space home decoration decoration home decoration home decoration home
Low carbon USS flat washers, typically used with Grade 8 or hardened steel bolting, are used under bolt heads or nuts to increase the bearing surface area, or to offer protection so that the nut or bolt can be rotated without distortion of the bearing surface. Flat washers are also used to give tightness to a joint, to prevent leakage, and especially to distribute pressure under the head of a bolt or nut. Dimensional specifications are governed by ASME B18.21.1. USS (United States Standard) flat washers have a larger outer diameter than SAE (Society of Automotive Engineers) flat washers, and can be utilized in nearly any application. ASTM F844 covers the standard specifications for unhardened steel flat washers for general use. Available in zinc plated finish. Zinc plating sacrifices itself, corroding before the base material, offering added corrosion resistance.
If you need more information or want to order washers, please contact us.
Carbon Steel Gasket,Zinc Coated Washers,Galvanized Steel Washers,Galvanized Plate Washers
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com