Diamond Grinding Machine Operation Precautions
Diamond grinders are a kind of hardware machinery products that are often used in modern industry. In general, the operation of diamond grinders requires professional training. Therefore, it is necessary to pay more attention to the operation of diamond grinders. Usually people In the process of operating diamond grinders, the following major problems often occur. Therefore, Xiaobian hereby summarizes the following for you, hoping to help more people understand how to operate diamond grinders and to pay attention to the process of operating diamond grinders. What matters.
1. Side grinding:
In the daily use of the grinder, it is also necessary to classify the grinder, but in the daily use process, many operators do not use the type of grinder, and use the side of the grinding wheel to grind at random, which is a serious violation of safe operation. Violation of the rules of operation. According to the regulations, the grinding wheel with the circumferential surface as the working surface should not be grounded. The radial strength of the grinding wheel is large and the axial strength is very small. When the operator is too strong, the grinding wheel will be broken and even hurt. In practice This behavior should be prohibited during use.
2, positive operation:
In daily use, many operators are always accustomed to working on the grinding wheel because the direction can be used. In fact, this behavior is a special prohibition in the operation of the grinder. According to the operating procedure, when grinding the workpiece with a grinder, the operator should stand on the side of the diamond grinding wheel and must not operate on the front side of the grinding wheel to avoid the grinding wheel flying out or the grinding wheel breaking and flying out and hurting when the grinding wheel fails.
3. Hard operation:
In the use of grinders, some operators, especially younger operators, are trying to grind quickly and use too much force, which is a very unsafe operation. The flatness of any grinding wheel has a certain strength, which is likely to cause the grinding wheel to break, or even fly out and hurt people, it is also a behavior that should be prohibited.
In short, the wheel operator needs to have a certain level of professionalism. If you need a place to use the grinding wheel, then Xiaobian suggests that you should find a professional operator to operate it, and you can also perform the operation test according to the above method. Oh!
Concerned about surprises
Label: Diamond Grinding Machine Operation Precautions
Previous: Select ceiling products from the composition structure Next: How to use and maintain pneumatic tools
Holland Mesh Fence
* Using high quality iron rod as raw material, the welded panel or rolled fence, after Galvanization, PVC Powders dipped coating; it can resist the corrosive and ultraviolet radiation very strongly.
Selection of high-quality wire welded together, the PVC or PE, PP powder after curing the surface of the coating, with strong adhesion, corrosion resistance, bright color and so on.
Manufacturing process: steel wire after the plastic coating, but also a separate plating, hot-dip and plastic coating.
* Mushroom special Tubes (48*1.5mm) is designed refined and scientific, with plastic caps on the top of the post.
The finished surface usually is Galvanized and Powder coating, or alternatively. It usually uses installation method of burying additional 50 cm pass panels height into the earth. Special sizes can be provided as the client`s request.
* Euro fence has good anti-corrosion properties, anti-aging, elegant appearance. Easy to install Can be widely used in industrial, agricultural, municipal, transportation and other industries fence, decoration, protection and other facilities. With good filtering accuracy, high load strength, low cost.
Holland Mesh Fence,Welded Holland Fence,Wire Mesh Holland Fence,Holland Wire Mesh Fence
HeBei Bosen Metal Products Co.,Ltd , https://www.bosenfence.com