Active partition wall: free space is ingeniously isolated!
Partitioning is a common method of separating spaces in home improvement. The beautiful partition wall not only can decorate the effect, but also can separate the space and bring convenience to life! The movable partition wall is even more different, and the space can be separated at any time to meet the different needs of your work and life. So, what are the characteristics of the active partition wall? Let's let the decoration home decoration network Xiaobian answer for you!
First, the floor does not have a rail, and it is only necessary to mount the rail on the ceiling.
Second, the partition wall is firm and reliable, safe and reliable, and difficult to swing.
Third, the partition wall has a good sound insulation effect, and the maximum sound insulation coefficient can reach 50dB.
Fourth, it has excellent heat insulation performance, and can divide large space into small space according to different occupancy rate, thereby reducing power consumption and saving energy.
Fifth, it is made of high-efficiency fireproof material and has good fireproof performance.
Sixth, the movable partition wall is beautiful in appearance, can be arbitrarily decorated on the surface, and is coordinated with the interior decoration style.
Seventh, the partition of the movable partition wall can be freely retracted, and it is flexible and convenient, saving labor and worry.
Eighth, it can be installed and disassembled at any time without affecting the layout of the ground.
Tenth, the movable partition wall can be widely used in exhibition halls, conference halls, restaurants, high-clean factories, offices and other places, and can also be used for partitions of living rooms, bedrooms and bathrooms, so that the space is more layered.
The above is the knowledge of the partition wall of the decoration house, which is introduced by everyone. The movable partition wall can subtly change the spatial layout, create free space freely, and make the monotonous home life full of creativity. Is it very attractive? If you want to know more about related topics, please pay attention to our decoration encyclopedia!
1. Components of piston rod seal:
Polyurethane, polyformaldehyde, rubber
2. Purpose and function of piston rod seal:
The rod seal belongs to the dynamic seal. It is the seal that moves with the piston rod. It is one of the important components on the hydraulic support.
3. Use position of piston rod seal:
Guide sleeve, piston
4. Working principle of piston rod seal:
It is used at the contact part between the guide sleeve and the outer cylinder to seal the emulsion in the outer cylinder.
5. What effects will be caused by improper use or operation of piston rod seal:
1. Improper selection of cavity support material will wear the cavity and piston rod.
2. The size of the friction pair is inappropriate, causing wear.
3. Improper thread guide angle of cylinder barrel and piston end wear the sealing ring.
4. The seal ring is worn due to improper installation guide angle of the seal.
5. The surface of cavity and piston rod is rough, with scratches and worn seals.
6. The outer cylinder leaks and the jack does not maintain pressure.
Piston Rod Seal,Hydraulic Cylinder Rod Seal,Pneumatic Rod Seal,U Ring Seals,Hydraulic Seals
DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com