Wenzhou Pioneer Valve introduced a new high-platform three-ball valve products (Figure)

Recently, Wenzhou Pioneer Valve Co., Ltd. has just launched a new high-platform three-piece ball valve products, features are as follows: First, the new structure: the valve body and bonnet with a separate bolt connection, easy maintenance and installation. Second, stem leakage design 1, stem blow out design. 2, the first stage of sealing, tapered stem seals effectively prevent media leakage during stem rotation, and in the abnormal state of pressure, but also can effectively prevent leakage. 3, the second stage of sealing, a group of V-shaped packing to expand both sides after being compressed, thus preventing leakage. 4, the release of disc spring preload compression force automatically compensate for packing and stem seal wear. 5, use the stem nut to squeeze all the stem seal system to prevent leakage. 6, the back-up pad to fix the stem nut to prevent it from loosening. Third, the manual lock design: switch lock valve must be maintained in the existing position to prevent accidental misuse of the risk. The ball valve platform and handle with a keyhole, with a padlock in the closed position or open the valve lock. Fourth, the high platform design: ISO5211 standard platform design, without connecting bracket and sleeve, the actuator installation becomes simple. Wenzhou Pioneer Valve Co., Ltd. is a member of China General Machinery Industry Association Valve Branch, China Valve City Meritorious Enterprise, Wenzhou Longwan Valve Industry Association, the first vice president of units, ultra-short ball valve enterprise standard filing units. Is a design, development, sales and service as one of the valve manufacturing enterprises, "Ollie hair" is a registered trademark of pressure valves, "Pioneer" is a registered trademark of vacuum valves. After nearly 20 years of continuous development, exploration, innovation, has accumulated rich experience in technology, established a relatively perfect quality management system and after-sales service system, passed the ISO9001: 2008 quality management system certification replacement, and has achieved " Special Equipment Manufacturing Permit "(pressure piping components) TS certification. Continuous innovation, the pursuit of perfection in the industry set a "fine" technology image. To the pursuit of excellence as the goal, the creation of brand names in order to seek win-win situation as the prerequisite, the future and dedication and new and old customers at home and abroad to establish long-term friendly and cooperative relations.

VTM Tubes

Performance advantages:
1.Strong water absorption capacity
2.Increase the collection and release of samples
3.Good abrasion resistance
4.Do not scratch the wiped device
5.No chip drop
6.100% sterilization and disinfection

Operating Steps:
1 Touch the swab to the surface where it is aimed to obtain the sample.
2 Remove the tube cap and put the swab into the transport medium.
3 Break the shaft of the swab so that it will fit in the tube.
4 Close the cap securely.Write on the tube the necessary information about the patient and sample.

VTM Tube,Tube VTM,VTM Tube Price,VTM Test,VTM Test Tube,Lab Test Tube,Small Test Tube,VTM Sampling Tube

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue.com