Correct application of vegetable foliar fertilizer
I. Spraying the foliar fertilizer on the road 1. Leafy vegetables such as cabbage, spinach, celery, etc. need more nitrogen, spray fertilizer should be mainly urea, ammonium sulfate, spray concentration of urea 1% -2%, Ammonium sulfate 1.5%, spray 2-4 times per season, suitable for spraying in the growing season.
2. Fruits and vegetables such as pepper, eggplant, tomato, beans and various melons have a balanced demand for nitrogen, phosphorus and potassium, and a mixed solution of NPK or compound fertilizer should be used. It can be sprayed with 1%-2% urea and 0.3%-0.4% potassium dihydrogen phosphate mixed solution or 2% compound fertilizer solution, usually sprayed 1-2 times in the pre-growth stage and the late stage. Post-spraying can prevent premature aging, enhance stamina, and have a good yield increase effect.
3. Root vegetables such as garlic, onions, radishes, potatoes, etc. require more phosphorus and potassium, spray 0.3% potassium dihydrogen phosphate solution, 10% grass ash leaching solution, spray 3-4 times per season.
Second, the spraying time should be suitable for spraying foliar fertilizer on the cloudy or sunny morning or after 4 o'clock in the afternoon, when the sun is not too strong, the effect is best. Under normal circumstances, it is better to keep the blade moist for 30-60 minutes. If it rains within 3 hours after spraying, it should be sprayed once every day, but the concentration should be reduced appropriately.
Third, the spraying method Foliar spray fertilizer is mostly sprayed with a sprayer, generally sprayed on the back of the blade is better, because the back spray less fertilizer and more fertilizer.
Fourth, to have enough spray volume is generally good when the fertilizer liquid will flow down the blade without flowing down.
Zhejaing Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter, ATEX, IECEx & CE approved. The product range covers different size from DN03 to DN150, and bigger sizes are being developed.
Sealand mass flow meter is designed and produced according to world`s latest Coriolis technology with exelent appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube, widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy, marine, power, pulp & paper, water & wastewater industries, etc.
Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.
Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com