Timing smooth protection of the bearing during operation
| Home>Bearing knowledge> Timing smooth protection of working bearings |
Timing smooth protection of the bearing during operation
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
2, smooth oil smooth timing to check the oil level and oil quality of the smooth oil; usually; the normal oil level should be the equipment oil level window or within the range of 1/3-2/3. The oil filling method is the oil cup; The oil level that appears is only representative of the oil replenishment; the oil level of the bearing housing is satisfactory for the operation; the oil level in the oil cup is less than 1/4 of its total volume.
View and replenish the oil method; take out a small amount of smooth oil as a sample and compare it with fresh smooth oil; the qualified unit can think about the oil quality test; to ensure the oil quality is qualified. If the sample looks like a cloud; then it can be with water The result of mixing; that is, the oil emulsification we often say; the smooth oil should be replaced at the moment.
If the color of the sample is darker or thicker, it can be shown that the smooth oil is now carbonized at the beginning; the old smooth oil should be completely replaced. If it is possible; use fresh smooth oil to wash the oil circuit. When replacing the smooth oil ; should ensure that the replacement of the smooth oil new and old type; and make up for the satisfactory demand of the oil level.
Use oil-type smooth system; if the oil temperature is below 60 ° C (140 ° F); and the smooth oil is not contaminated; then replace the smooth oil once a year. If the oil temperature is 60-100 ° C (140- 210°F); replace the smooth oil four times a year. If the oil temperature is 100-120°C (210-250°F), replace the smooth oil once a month. If the oil temperature is 120°C (250°F) Above; then replace the smooth oil once a week.
The correct device and protection are important factors for the normal operation of the bearing; together; it is necessary to pay attention to the cleanliness of the bearing. It is necessary for the bearing to avoid contamination by pollutants and moisture; it is necessary to have the correct device and smooth. The description of the bearing arrangement, the condition of the oil seal, the way of the smoothing agent and the replacement cycle and the special protection play an important role; it is necessary to pay attention to it.
Recommend to friends comments close window
| Bearing related knowledge |
| Commonly used orbital bearings are equipped with plastic FAG bearings and metal sliding bearings. Differences in rolling bearing clearance analysis of cast iron housings. Causes and prevention methods of arc welding |
This article links to http://
Please indicate the bearing network http://
Previous:Analysis of the method of hot-loading skf bearing Next:BARDEN company bearing make up code
Our safety grating create safer working conditions across a variety of industrial environments. Some of the industries that benefit from using our products in the construction of their walkways, ladders, stairs, ramps.
Stair treads metal grating offers a number of advantages. The material provides greater strength, reliability, and flexibility, qualities that make it well-suited for use in critical structures, such as stairs, ducting, roofing, and more.
hot rolled, cold rolled, aluminum, galvanized plate,
stainless steel panel etc.
Anti-skid plate can be widely used in sewage treatment, power plant,
snow, stair step, antiskid pedal, and many other anti-skid areas.
Our safety grating provides a lightweight but durable surface that reduces the risk of slipping. It is suitable for use in many crane components, including the stairs, walkway, and operating platform.
The material offers durability and slip resistance-even when exposed to harsh road conditions, such as rain, snow, sleet, and dust-qualities that help ensure the safety of workers during loading and unloading operations.
Safety grating is used for many truck body components, including steps, flooring, and work platforms.
Features:
Corrosion resistance, Rust resistance.
Anti-slip resistance, Good air circulation.
Good drainage performance, Easy to install and uninstall.
High strength-to-weight performance,Durable and long lifespan.
--- PRODUCT SPECIFICATIONS---
Material
Hole patterns
crocodile mouth, round raised hole, tears shape etc.
Thickness
generally 2mm, 2.5mm, 3.0mm
Height
20mm, 40mm, 45mm, 50mm, customized
Length
1m, 2m, 2.5m, 3.0m, 3.66m
Production technique
punching, cutting, bending, welding
Use
Safety Grating,Aluminum Safety Grating,Heavy Duty Safety Grating,Galvanized Safety Grating
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com