The difference between the hanging door and the sliding door

Hanging doors and sliding doors, many people are more familiar with sliding doors, and are more strange to hanging doors. The difference between the hanging door and the sliding door is not clear when purchasing. Some guests can't even distinguish the hanging door and the sliding door. Today, Qijia.com will tell you about the hanging door and the sliding door. Related content, look at the difference between the hanging door and the sliding door.

Overview of hanging doors and sliding doors

1, sliding door

The main support point of the door leaf pulley is adopted, and the sliding door is pushed and pulled by the underground rail. The main force point is on the lower pulley, and the upper pulley is mostly for auxiliary sliding action. Therefore, the quality of the ground rail and the lower pulley directly affects the sliding door. The service life. Traditional sliding doors are mostly used in the bedroom or the wardrobe of the wardrobe, but with the development of technology and the variety of decoration methods, from sheet metal surface, to glass, fabric, rattan, aluminum alloy profiles, from sliding doors, folding doors to partition doors The function and scope of use of sliding doors are constantly expanding. In this case, the use of sliding doors began to become diverse and rich. In addition to the most common partition doors, sliding doors are widely used in bookcases, closets, living rooms, showrooms, push-pull doors and so on.

2, hanging door

Supported by the upper hanging wheel, the lower rail is positioned, and the sliding door is pushed and pulled left and right. The main bearing force is the aluminum alloy hanging rail, and the quality of the upper hanging wheel also determines the service life of the hanging door. Hanging doors are suitable for balconies, restaurants, kitchens, toilet partitions, etc.

The difference between the hanging door and the sliding door

The difference between the two First, both are to push and pull the door in a push-pull manner.

The sliding door has a ground rail under the rail, and a dark wheel is arranged under the door for sliding. The gravity of the rail sliding door is below. The ground is always more stable than the sky. The sliding door is simple to install and easy to repair. The ground must be done. A door slot, but the track under the sliding door is very easy to accumulate water, hiding dirt, and it is relatively troublesome to carry out hygiene.

The hanging rail is installed above the hanging door and equipped with a hanging wheel for sliding. The lower part is only a guiding wheel. It does not contain water and is not easy to clean. It is more convenient to clean. Moreover, the door is open without noise, no threshold, beautiful and generous. We have shown through a large amount of information that the service life of the hanging door is not as good as that of sliding doors, so we give priority to sliding doors when recommending products to customers.

The profiles of aluminum alloy doors on the market are divided into titanium magnesium alloys and recycled aluminum. High-quality door profiles are made of aluminum, tantalum, copper, magnesium, manganese and other alloys. The toughness has great advantages, and the thickness can reach more than 1mm, while the lower quality profiles are recycled aluminum, toughness and use. The number of years has been reduced.

Refrigeration Solenoid Valve Coil

The category of Solenoid Valve Coil used in Refrigeration Solenoid Valve.

Danfoss Solenoid Coil, Castel Solenoid Coil, Solenoid Coil For Refrigeration Solenoid Valve

NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com