Skillful CAD Tutorial: The Parting Surface of Zhongwang 3D Mould (2)

4. The parting surface of the sweep curve, which uses any three curves or edges to create a new parting surface. The following figure shows the data selection items needed to create the parting surface.

The method of creating this parting surface is to select the first starting curve, then the second ending curve, and finally select the trajectory that forms the parting surface. Thereby forming the required parting surface!

5. Partition surface transition, using the parting surface of the mold, the curve that needs to be transitioned, the end plane, the direction of extension, and the transition angle to achieve this step. The figure below shows the data options required to create a parting surface.

The way to achieve the desired effect is: according to the required data, first select a parting surface, then select the boundary curve of the transition, the third step is to select the end surface perpendicular to the extending direction, then select the direction of the extension and define The angle of transition to achieve the desired effect.

6, the parting surface rounded corners, the two adjacent parting surface transition rounded corners, the split surface rounding dialog box as shown below.

Select two adjacent parting faces in the Vertex dialog box, set the data in the Radius dialog box, and fill in the faces from the two adjacent parting faces.

7. The transformation loop creates a surface by creating a desired parting surface using a plane and the edges that need to be transformed into parting surfaces. The figure below shows the data options required to create a parting surface.

The way to create this parting surface is to first select a plane, then select the edge on which to create the parting surface, set a boundary (either external or non-trimming) to create a new one. Parting surface.

The above are the methods that support the creation of parting surfaces in Zhongwang 3D. In fact, the most important thing is to combine them with the parting line. Before I introduced the article about Zhongwang 3D parting line, you can combine the two articles together to implement the operation. The method written above is relatively simple. You can combine the things you want and use the methods to combine them. It will be a lot easier to create.

Hospital Sliding Door

Door panel: door panel is made of stainless steel 304 with no frame. Core materials are paper honeycomb, aluminum honeycomb, PU, EPS and etc. The installation sites of door lock, door closer and hinge are reinforced with square tubes of more than1.5mmthickness which are compression moulded by special technology.

Door frame: it is made of completely stainless steel 304. The connection types with wallboards are double-clip type and aluminum connection. The former is applied mostly to machine made wallboard and the latter hand made wallboard. The accessories are double window and lift type sweeping bar. The lock can be famous door lock or the owners can select lock brands themselves.

Specification: common sizes 800X2100, 900X2100, 1500X2100 or1800X2100, can customize to customers` requirements, the materials can be selected according to customers` requirements such as306Lor other special materials.

Features: the stainless steel 304 door we produced are of elegant appearance, sturdy and durable, acid and rotting resistance and thermal insulation. It is the first choice for high-end projects at home and engineering concerning foreign affairs that requires for anticorrosion and high quality such as electronics factory and food factory

Hospital Sliding Door,Hospital Automatic Sliding Door,Hospital Sliding Glass Door,Hospital Sliding Ward Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.pvchighspeeddoor.com