Replacement bearing

2024-03-14 17:07:08
Home>Bearing knowledge>Replacement bearing
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Replacement bearing

Source: China Bearing Network Time: 2018-06-26
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The detailed method for determining whether the bearing should be repaired; that is, the detailed method for the bearing to be fully utilized and the near damage is presented as follows:
1) Using the bearing operation monitoring instrument, such as the iron spectrometer or SPM or I-ID 1 bearing operation monitoring instrument to determine the bearing operation status and when the bearing should be repaired; this is the most convenient and reliable method .
For example, when using the HD 1 type instrument; when the pointer is close to the danger zone by the warning zone; and the pointer does not come back after adopting the method of improving the smoothness, etc.; it can be found that the bearing itself is a problem; at this moment, when the danger zone is not entered; Repair the bearing. After all, it is far from the danger zone to start repairing; it can be adjusted by experience.
The use of such instruments; can fully utilize the potential of bearing operations; repair the bearings in time; and prevent the occurrence of problems; it is safe and economical.
2) Use simple things to monitor in the case where the above instruments are not available; the operator can hold the round bar or the wrench and other things that are closest to the outer casing of the bearing; the ear is ashamed to monitor the sound of the bearing from the thing; It can also be modified with a medical stethoscope.
Normal bearing work sound should be uniform; smooth and not sharp sound; abnormal bearing work sounds have a lot of intermittent; impact or sharp sound. First of all, get used to the normal bearing work sound; then you can master Determine the abnormal working sound of the bearing; then accumulate through the practice experience; further can distinguish what kind of abnormal sound corresponds to what kind of abnormal bearing appearance. There are many kinds of abnormal sound of the bearing; it is difficult to say; Rely on experience.
Recommend to friends comments close window

Bearing related knowledge
Characteristics and drawing layout of INA thin-walled bearing products. Demand for smoothing agents for rolling bearings. Analysis of self-aligning ball bearings. Application of plastics in rolling bearings (4)
The basic layout and effect of the rolling bearing


This article links to http://
Please indicate the bearing network http://

Previous:About: Y-bearing with flat head screw Next: The considerations for the use of linear guides

Laser Digital Detector for Guide Rail

  1. Laser Digital Detector for Straightness and Torsion Resistance of Elevator Guide Rail

  2. Detector for Elevator Guide Rail Geometric State

  3. Laser Detector for Elevator Guide Rail Coplanarity

  4. Laser Corrector for Elevator Guide Rail Installation

  5. Laser Detector for Elevator Guide Rail Verticality

  6. Laser Detector for Coplanarity of Distance Between Guide Rail


We carry high quality Laser Digital Detector for Guide Rail for all major elevator and escalator brands

for OTIS Elevators, ThyssenKrupp Elevators, Schindler Elevators, KONE Elevators, Mitsubishi Elevators, Fujitec Elevators, Hitachi Elevators, Toshiba Elevators, Fuji Elevators, Express Elevators, Sigma Elevators, LG Elevators, Hyundai Elevators, BLT Elevators, CANNY Elevators, SJEC Elevators, KOYO Elevators

Laser Digital Detector for Guide Rail, Detector for Elevator Guide Rail, Laser Detector for Elevator Guide Rail, Laser Corrector for Elevator Guide Rail

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjfullelevatorreplacement.com