Qualcomm Black Technology: Increase Your Mobile Wi-Fi Signal by 60%
 |
During the Taipei Computer Show, Qualcomm demonstrated that LTE and Wi-Fi shared antenna technology can increase the Wi-Fi signal of mobile phones by 1.6 times. We know that most mobile phones need to use two antennas each for LTE (ie, 4G) and Wi-Fi in order to increase the transmission rate, but the more antennas, the more difficult it is to design.
These mobile phones used two antennas for 4G downloads, and only one was used to send data out. So, Qualcomm did this: precisely grasped the time slot on the baseband and intelligently switched the other antenna to Wi-. Fi use.
Specifically, LTE uses its second antenna at an interval of 200 milliseconds for sending and receiving data. Therefore, many times, Wi-Fi can enjoy the second antenna of LTE and thus become 2x2 Wi-Fi. And the better the LTE signal is, the more Wi-Fi power is reduced.
It is worth mentioning that this technology requires enough software intelligence to continuously monitor the status of LTE and ensure that LTE and Wi-Fi share antennas in real time.
A Geogrid is Geosynthetic Material used to reinforce soils and similar materials. Commonly used for soil reinforcement applications such as retaining walls, steepened slopes, bridge abutments, embankments, embankments over soft soils and waste containment, as well as subbases or subsoils below roads or structures. Soils pull apart under tension. Compared to soil, geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would otherwise be the case. Lianyi geogrid offers a number of geogrids to meet any specific requirements.
Application:
1,It can widely apply in the water conservation, the municipal administration,
2, The building,the transportation, the subway,the tunnel,
3, The environmental protection and so on.
Funcations:
1, Improving bearing capacity of road foundation and prolong its service life.
2, Preventing road surface from subsiding and cracking.
3, Be convenient for construction, reducing cost and maintaining expense for the project.
4, Providing stability for slopes and avoid the losing of the water and soil.
Packing & Delivery
Geogrid Specifics:
|
Property
|
Test Method
|
TGSG
15-15 |
TGSG
20-20 |
TGSG
30-30 |
TGSG
40-40 |
TGSG
50-50 |
|
|
Ultimate tensile strength
|
MD
|
|
15
|
20
|
30
|
40
|
50
|
|
CD
|
15
|
20
|
30
|
40
|
50
|
||
|
Elongation at maximum load (%)
|
MD
|
13
|
13
|
13
|
13
|
13
|
|
|
CD
|
13
|
13
|
13
|
13
|
13
|
||
|
Tensile strength at 2 % elongation (kN/m)
|
MD
|
5
|
7.5
|
10.5
|
14
|
18
|
|
|
CD
|
5
|
7.5
|
10.5
|
14
|
18
|
||
|
Tensile strength at 5 % elongation (kN/m)
|
MD
|
7
|
14
|
21
|
28
|
35
|
|
|
CD
|
7
|
14
|
21
|
28
|
35
|
||
|
Minimum Carbon Black
|
%
|
ASTM D 4218
|
2
|
||||
Geogrid
Uniaxial Geogrid,Plastic Bidirectional Tension Geogrid,Pe Biaxial Geogrid,Fiberglass Geogrid
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com