Powder packaging machine maintenance and repair

The use of powder packaging machines, advanced automation mode not only effectively improved the company's production efficiency, product packaging quality has also been better protected. Therefore, large-scale vertical powder packaging machines have become one of the preferred packaging facilities for major companies. However, I would like to tell everyone that after the powder packaging machine is purchased, it is necessary to pay attention to daily maintenance and maintenance, because Not only can the life of the equipment be extended, but the equipment itself will not fail and so on. So for the maintenance and maintenance of powder packaging machines, I will give you some information.

(1) Lubrication: It is necessary to regularly lubricate the gear meshing positions, the bearing bearing oil filling holes and the moving parts, and once every shift, the speed reducer is strictly prohibited to run without oil. When filling the oil, be careful not to turn the tank on the rotating belt to prevent it from being damaged by slippage or premature aging of the belt.

(2) Cleaning: After shutting down, it is necessary to clean the measuring part in time, and the heat sealer body should be cleaned frequently to ensure that the sealing pattern of the finished packaged product is clear. The scattered materials should be promptly cleaned to facilitate the cleanness of the components, and thus To extend its service life, it is also necessary to clean the dust in the electric control box frequently to prevent electrical faults such as short circuit or poor contact.

(3) Maintenance: Before using the powder packing machine, check the screw of each part and do not loosen it. Otherwise, it will affect the normal remote rotation of the whole machine. For its electrical parts, attention should be paid to waterproof, moisture, corrosion, rat-proof. In order to ensure that the electric control box and the wiring terminal are clean, to prevent electrical failure, after the shutdown, the two heat sealer bodies should be in the open position to prevent scalding of packaging materials.

Hot Recommendation: Food Granule Packaging Machine [Recommended] Automatic Fitting Packaging Machine [Recommended] Food Pillow Packaging Machine [Recommended] Weighing Quantitative Packaging Machine [Recommended] Fully Automatic Double Room Vacuum Packaging Machine [Recommended] Food Loading Machine [Recommended] Liquid small filling machine [Recommended]