Moisture removal and aroma
In the hot and humid summer climate of the island country, if the drainage and dehumidification are not noticed, often the wall cancer has not been reported, and the mold has already climbed on the wall of the home. These mottled black spots floating in the space spore baby, not only will cause Respiratory diseases and allergies, such as bronchitis, hay fever, asthma, and other symptoms, people with low immunity may also cause headaches, fever, and even skin or mucous membrane inflammation! What are the causes and solutions of the wall black and white?
The 30-year-old house in Yangmingshan can't get rid of the entanglement of moisture, and it can't be cured after going through several projects. The ground is often covered with a layer of moisture due to the effect of moisture regain. A solid foundation project to cure the wall cancer, coupled with full heat exchange gas and dehumidifiers in the entire room, keeps the indoor temperature and humidity in the most comfortable state at any time, making the mountain life more comfortable.
â–Common causes of mildew on walls
1. Seasonal factors: In the home space in Taiwan where the wall is not additionally provided with an insulation layer, the season of heavy humidity is likely to be condensed on the wall due to condensation of moisture in the air, causing the wall to be wet and producing mold. The problem is that the walls are mildew.
It is recommended to reduce the opening of windows in the wet season. In addition, cooperate with the dehumidifier and air conditioner to absorb the moisture of the wall. Once the moisture on the ground, wall and home is found, it should be wiped with a dry cloth immediately. In addition, this kind of mildew caused by the season, it is best not to repair immediately, should wait until the dry season, the water content of the wall is reduced, before re-covering the new paint or wallpaper to avoid mold again.
2. External rainwater infiltration: cracks appear at the junction of the baffle under the balcony window and the wall, or the sealing performance of the window is not good, and the waterproofing of the external wall is not properly treated, which may allow the rainwater to infiltrate from the outside, causing the wall to be wet.
3. Water seepage caused by pipeline rupture: The hidden pipes buried in the wall are damaged or leaked due to external force, and the water directly enters the wall. Through the siphon phenomenon, the water vapor will gradually spread to the entire wall, resulting in a large-scale wall Wet.
These two types of walls are damp, and it is easy to be accompanied by structural problems such as wall cancer, paint peeling, and rusting of steel bars for a long time. It is recommended to find out the causes of water leakage and water seepage. After radical treatment, start the mold removal and wall repair.
Mottled walls and broken wall cancer are the old expressions before the renovation of the old country house. Under the premise of immovable structure, Shang Yang's ideal home has made the old house have a restaurant-like taste through the reinforcement of the wall.
â–Simple handling of small steps is generally aimed at the case of serious mold on the wall. It is recommended to remove the moldy block and repaint after resolving the cause of moisture; for renters or emergency situations where guests are coming, the following editors provide two An emergency trick to cure the symptoms but not the root cause, effectively solve the ugly mold on the wall!
[Tips.1]
First use a dry toothbrush to remove the mildew stains, and then wipe with 80% alcohol. While the alcohol evaporates, it can take away the moisture of the wall and accelerate the drying of the wall to prevent the growth of mold.
[Tips.2]
Mix the bleach (powder) with water at 1:99, spray the bleach solution evenly on the moldy wall with a spray bottle, and then wipe the bleach with clean water after drying to remove mold on the wall.
Wear gloves, masks and glasses when brushing off molds to avoid involvement or direct contact with molds and solvents. In addition, you can also use the mold removal spray on the market to solve the problem of simple mold growth. If you want to strengthen the moisture resistance of the wall, you can additionally paint with anti-mold paint to make the wall resistant to moisture. .
Editor in charge: GO Jiaju CC
Drinking Water Faucets, Drinking Water Tap, Kitchen Drinking Water Faucet, Stainless Steel Drinking Water Faucet
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valve.com