Maintenance method for decorative stone to maintain original brightness
With the development of the times, everyone's aesthetic requirements for buildings are getting higher and higher. Natural stone can be used as an excellent decorative material through surface treatment. It protects and decorates the building. It shows its superiority in many aspects. Its natural beautiful patterns and colors are more unique than other decorative products. . However, if the stone is not properly cleaned and maintained, its natural charm will gradually disappear. In the process of daily maintenance, in order to make the maintenance of stone more perfect, what details should we pay attention to?
First, do not use non-neutral detergents
Stone is afraid of liquids with strong acidity and alkalinity. When cleaning stone, it is not necessary to quickly clean the stone and ignore the ingredients of the detergent. Generally, detergents contain acidity and alkalinity. Therefore, if the cleaning agent of unknown composition is used for a long time, the surface gloss of the stone will be lost. In addition, the residue of non-neutral chemicals on the stone is also the main cause of stone lesions in the future.
Second, can not be waxed at will
There are many kinds of waxes on the market, such as water-based wax, stearic acid wax, oily wax, acrylic wax and so on. These waxes basically contain acid and alkali substances. Not only will it block the capillary pores of the stone, but it will also be stained with dirt to form wax scale, which will cause yellowing of the stone surface. When it is necessary to wax at a place where pedestrians and goods are frequently distributed, the professional maintenance company must be instructed to use wax and maintenance methods.
Third, always keep ventilation and dry
Stone is afraid of too much ambient humidity. Water vapor will produce hydration, hydrolysis and carbonation of the stone, producing various spots such as water spots, whitening, weathering, denudation, rust yellow, etc., and destroying the stone. Therefore, the stone installation should always be kept ventilated and dry.
Fourth, we must pay attention to the choice of protective agents
After the protective construction of the stone, it must be able to maintain the permeability, water resistance and antifouling properties of the stone. Do not use the protective agent of unknown route, so as not to achieve the protective effect, but increase the difficulty of stone maintenance.
Five, to be completely clean and clean
Whether it is hard granite (hardness HRs88-1114-7) or softer marble (hardness HRs46-773-5), it is not resistant to wind and sand. Therefore, it is necessary to use dust collectors or electrostatic mops to thoroughly perform dust removal and cleaning work. It is best to place the dust-removing mat at the entrance of the commercial space to avoid sanding the stone with the sand. It is best to change the slipper after the entry to reduce the sand and dust.
Sixth, regular maintenance and maintenance of luster
Dust removal and cleaning can not keep the bright stone to keep the gloss from fading. Therefore, we must regularly maintain professional stone maintenance personnel for maintenance and gloss regeneration. For example, using crystallizing liquid to recrystallize the marble surface, or using polishing powder to regenerate the marble or granite surface, or using a breathable gloss protectant, etc., can make your stone last forever.
Seven, regular protection
To protect the life of the stone, the penetration of water and pollution sources must be regular (depending on the type of stone and the quality of the protective agent. It is best to do 1 or 2 times in 1 to 3 years) for protection.
Eight, can not cover the carpet for a long time, sundries
In order to keep the stone breathing smoothly, it should avoid covering the carpet and debris for a long time on the stone surface, otherwise the moisture under the stone cannot be volatilized through the pores of the stone. Stones can cause annoying stone lesions due to excessive moisture and increased water content. If you must lay carpets and pile up debris, don't forget to move them often.
Nine, to immediately remove pollution
All stones have natural pores, and the source of pollution (oil, tea, coffee, cola, soy sauce, ink, etc.) can easily penetrate into the interior of the stone through the pores, creating annoying stains. Therefore, we must choose a good quality stone special protective agent to prevent pollution sources from polluting the stone. It is necessary to know that all protective agents are not likely to block pollution for a long time, so once the contaminated source is on the stone, it must be removed immediately to prevent penetration into the pores of the stone.
Amino Acid is plant source,colour is light yellow powder,used for agriculture,foliar spray,fertigation,drip irrigation etc.Amino acid contains several different grade specification 50%-80%,the main function is as below:
1. To make crops grow stable and strongly, high fertilizer utilize.
2. To promote photosynthetic transfer and transportation
3. To improve the growth of roots environment
4. To use with Inorganic fertilizer which can increase nutrients also can increase crops yields.
5. To use this organic fertilizer will make soil soft
6. This series of products is organic food base
Amino Acid
Amino Acid,Amino Acid Powder,Amino Acid Plant,Amino Acid Fertilizer
Shandong Chuangxin Humic Acid Technology Co.,Ltd , http://www.humicacidcorp.com