Installation inspection of wires (phone lines, cable lines)

Home cabling type:

The comprehensive wiring of houses should be based on the principle of "utility first, appropriate advancement" and choose different solutions according to their own needs and spending power.

1. Basic type: Install telephone, network, cable TV and AV outlet in the main room;

2.Extended type: install telephones and network outlets in all rooms of the living room, install cable television and audio and video outlets, home lighting automatic control and security interface layout (magnetic door, gas leak, smoke alarm, microwave infrared detection alarm, Visual/non-visual intercom, etc.)

3.Luxury type: install telephone, network, cable TV and audio/video output, home lighting automatic control and security interface arrangement (door magnet, gas leak, smoke alarm, microwave infrared detection alarm, visible / Non-visual intercom, network monitoring, remote control of home appliances, etc.).

Integrated wiring advantages:

The modular structure design, flexible function configuration, good extensibility and upgradeability are the planning rules to be followed in home wiring.

1. Diversified application functions. Home audio/video networks, home communications application networks, home monitoring networks can be set up to meet various functions.

2. Facilitate future life. Reserve interfaces for places where you may need to use your device. In this way, the device connection can be completed as soon as the device is changed and the device is added in the future.

3. Save money. Information panel, broadband network interface, telephone, and computer can be used universally. Allows multiple computers at home to access the Internet at the same time, share a broadband network, or use a DVD player or computer to broadcast programs to make all rooms viewable.

4. Easy management. When you use it, you can complete the connection of the device without any special knowledge to achieve the desired function.

Integrated wiring steps:

Integrated wiring is the premise to achieve family personalization.

1. First, make basic assumptions about the functional distinction and personality of your own residence, then negotiate with the professionals, consider the routing layout comprehensively, and finally confirm a reasonable and perfect smart home plan.

2. Prepare design materials, including residential floor plans (including detailed dimensions and usage functions); decoration design drawings (positioning of electrical equipment); functions and special requirements that are most concerned; wiring diagrams of strong electrical systems such as lighting.

3. Ask a professional to install, configure, and maintain later.

Tips

a. It is necessary to have a forward-looking vision when selecting information points and cables. It is necessary to reserve sufficient carrying capacity.

b. All lines should be sleeved, and it is forbidden to use common lines for different types of cables.

c. The deployment of power equipment must be strictly in accordance with the relevant electrical codes.

d. Air conditioners, showers, electric showers, etc. It is recommended that you check the protective device before purchasing, and then configure the corresponding leakage protection switch.

Construction Acceptance Home Furnishing Residential Room TV Decoration Home Furnishing Home Design Drawing Decoration Home Furnishing

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification	Light Duty		Heavy Duty
Rang of the Door	Single-Leaf	Double-Leaf	Single-Leaf	Double-Leaf
Door leaf max weight	100kg	100kg x 2	200kg	200kg x 2
Mounting Method	Surface mounting or built-in mounting
Open Width	700-2000mm	650-2000mm	750-2000mm	650-2000mm
Power Supply	AC 220v ± 10%, 50-60 Hz
Opening Speed	300-500mm/s (adjustable)
Closing Speed	250-550mm/s (adjustable)
Creep speed	30-100mm/s (adjustable)
Hold-open time	0.5-20s (adjustable)
Airproof Force (Max.)	>70N
Manual Pushing Force	<100N
Electronic Lock Force	>800N
Power consumption	150W
Ambient temperature	-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com