Home decoration guide: bathroom decoration should be "three defenses"

Now decoration will have some unique decoration sequelae. Xiao Bian specifically for you to integrate all kinds of home improvement information, the introduction of home decoration guide series, for you to decorate a romantic love nest.

New Alcoa Shower Room      Nine animal husbandry leading     Opu Yuba

A reader calls to ask: The bathroom is the focus and difficulty of decoration, in the decoration process should pay attention to what issues?

Industry experts answered: There are many drainage pipes in the bathroom. It is very important for the floor to be waterproof, non-slip, and damp-proof on the roof. The bathroom is quite humid. At present, the general building is composed of a bathroom and a bathroom, so the bathroom is often surrounded by water vapor. Therefore, moisture protection at the roof is very important. To make the bathroom roof waterproof, it is best to apply a layer of water glass on the roof, and then use a waterproof PVC buckle plate.

When the new building is delivered for use, the bathroom is generally treated with water, but the majority of the people will decorate the floor tile, level the ground, re-lay water pipes, which will destroy the original waterproof layer of the bathroom, so the waterproof layer of the bathroom is Make sure to redo waterproof when decorating. First level the ground with cement mortar, and then do a waterproof treatment. Clean the floor first, and brush repeatedly with polyurethane (water glass) waterproof coating 2 to 3 times. The joints between the wall and the ground and the pipe-ground joints between the upper and lower water are the most easily leaked places. We must urge the workers to handle these corners. The waterproof coating must be applied in place. The decoration team is required to provide cement mulch to the kitchen and toilet, and brush up 10 to 20 centimeters of polyurethane waterproof paint from the ground. Then the floor is redone with polyurethane waterproofing to enhance waterproofness.

After the waterproof project is completed, close the door and the water outlet, fill the bathroom floor with water to a certain level, and make a mark. If there is no obvious drop in the liquid level within 24 hours, the roof of the house below the downstairs does not occur. Leakage, waterproof to be qualified. If the acceptance is unqualified, the waterproofing project must be redone and re-inspected. After confirming that there are no leaks, lay the tiles again.

Bathrooms often have water, and it is easy to slip on them. Therefore, it is best to use non-slip tiles with raised patterns. This type of tiles not only has good waterproof performance, but it is not too slippery even in the case of water. .

Sanitary entrance decoration company paint glass cement home decoration layout glass brick glass door kitchen glass sliding door bathroom waterproof overall bathroom bathroom door bathroom floor tile

Slurry Pump Metal Parts

1. Naipu Pump offers all metal wet parts with high chrome white iron (27% chrome).The high chrome white iron is a very good wear-resistant material and nice wear-resistant is our slurry pumps important character.

2. Metal Slurry Pump Parts material construction

Pump Parts,Slurry Pump Metal Parts,Metal Slurry Pump Parts,Slurry Pump Fluid Parts,Slurry Pump Wet Parts

Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com