FRP submerged pump product overview

[Asia Pump Network News] FRP liquid pump with polyvinyl butyral modified phenolic fiberglass, phenolic glass fiber reinforced plastic molded parts, coupling pipe, the liquid pipe made of semi-dry rolling process Phenolic glass pipe, the following is an overview of glass fiberglass submerged pump. FRP submerged pump Products: FRP submerged pump medium in contact with the parts, Department of polyvinyl butyral modified phenolic glass fiber, high temperature molded phenolic fiberglass parts, pipe joints, the use of liquid pipe half Dry-process made of phenolic fiberglass pipe, impeller shaft sleeve assembly with phenolic mortar and pump shaft into one, the liquid under the Ministry of assembly are bonded with phenolic cement, into the liquid all without metal and medium contact, Corrosion-resistant performance is absolutely reliable, the product has the advantages of light weight, high strength, no deformation, temperature resistance, corrosion resistance, etc. It can partially replace the precious metals such as molybdenum-containing stainless steel, titanium and titanium alloy in corrosion protection. The acid-resistant sub-pump in the direction of transmission and rotation: The pump is driven directly by the motor via a claw-type flexible coupling and the pump is rotated clockwise from the motor end. FRP submerged pump Product Category: WSY-type, FSY-type two types of submerged pump, 1.WSY-type vertical submerged fiberglass pump. FSY-type vertical centrifugal pump FRP pump, the pump into the storage tank due to the depth of different storage tanks, the design depth of 800mm - 3000mm between the arbitrary choice. As long as the liquid is higher than the pump body, you can start the liquid feeding without pouring. There is a leakage hole under the flat cover, and the liquid will not leak outside the storage tank. FRP submerged pump main purposes: submerged pump is widely used in chemical, petrochemical, metallurgy, dyes, pesticides, pharmaceuticals, rare earth, fertilizer and other industries, transportation on the tank does not contain suspended solids, not easy to crystallize, the temperature is not higher than 100 ℃ of various non-oxidizing acid (hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid) and other corrosive media the most ideal equipment. Above is the FRP submerged pump product descriptions, product categories, product uses a brief introduction, I hope can help you! Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)

Threaded Flange

Standard:
ANSI B16.5,
EN1092-1 DIN2565 DIN 2566

Size: 1/2''~60''
Class Rating: 150~2500
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: forge,
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;

Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835

Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800

Threaded flange is a flange that connects threads to pipes. When it is designed, it can be treated by a loose flange. The advantage is that there is no need for welding, and the additional torque on the cylinder or pipe when the flange is deformed is very small. The disadvantage is that the thickness of the flange is large and the cost is high. It is suitable for the connection of high pressure pipe.

The threaded flange is made from the inner hole of the flange into pipe thread and connected with the pipe with thread, which is a non welded flange. Compared with the flat welding flange or butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines which are not allowed to be welded on the spot. Alloy steel flanges are of sufficient strength, but they are not easy to weld or have poor weldability. Threaded flanges can also be selected. However, if the temperature changes rapidly or the temperature is higher than 260 C below -45 C, it is recommended not to use threaded flange to avoid leakage.

Threaded Flange,Din Thread Flange,Astm Threaded Flange,En1092-1 Thread Flange

HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com