FRP Grating Accessories, Paw Clips, SS316 Material

FRP gratings accessories, Clips, Paw type 
Product Description: 

Mach's grating supplies a number of different types of 316SS clips to attach its various molded and pultruded gratings to supporting members. Although the clips are illustrated here with molded grating products, similar clips are often available for our pultruded gratings as well. 

Installation- where possible, provide for a minimum of 40mm of bearing support at all grating
support points. Hold down clips should be used at the rate of one clips for every 0.5m 2 of grating
minimum, or at least 4 clips for any square or rectangular piece, or at least 3 for triangle piece
 
Classifications: 


About Mach's: 

1.A professional FRP grating manufacturer 10 years' experience in production and management
2.Approved by ISO, ABS, SGS, ASTM E84
3.Professional sales team
4.Over 100 professional workers
5.Provide high quality product,good after sales
6.Products acknowledged by many countries  like USA, England, Germany, etc. 

Our factory is located in Nantong, Jiangsu, which is near to shanghai. about 2 hours' drive. Nantong is a beautiful port city. 

Our Workshop: 


Our Certificates:



Our Warehouse:



Inspection before delivery & Package: 
 

Before delivery, we shall conduct FAT (visual inspect & load test) and  provide relative reports. If required by our customer, there shall be third party, and provide reports like ABS, SGS.

Report List:

1. ISO 9000 ABS Quality Evaluations
2. ABS Design Assessment
3. ABS Manufacturing Assessment
4. ASTM -E 84 Moulded Grating 1 class 15
5. ASTM -E 84 Moulded Grating 1 class 10
6. ASTM -E 84 Moulded Grating 1 class 25
7. UL -94 V -0
8. ROSH
9. EN 13501+A1 Fire classification

We provide corrugated boards, wooden package or steel pallet package. Or we can pack according to your 
request. 
Besides, check the package carefully and ensure that the package meet our customer's requirements. Take photos and send to customer for approval.
We promise all the products shall be delivered to your site intact without any damage. Believe in us.

Our Services: 

Pre-sale service: 
1. Custom design 
2. Product Consulting
3. Provide samples within 7 days

After-sale Service; 
1. Short Delivery time
2. Installation Instructions
3. 24h Consulting Service
4. Quality Compliants solving 


Our Promise: 

1. All items shall be furnished only by manufacturers having a minimum of ten (10) years experience in the design and manufacture of similar products and systems. Additionally, if requested, a record of at least five (5) previous, separate, similar successful installations in the last five (5) years shall be provided.
2. We shall offer a 3 year limited warranty on all FRP products against defects in materials and workmanship.
3. We shall provide proof, via independent testing less than six months old, that materials proposed as a solution do not contain heavy metals in amounts greater than that allowed by current EPA requirements


How we deal with customers' complaints? 
1.Accept complaints from our customers
2. Our sales team and QC team shall contact customers and investigate
(Analysis and fast reply within 24 hours)
3.Communicate and customers provide defect products' pictures or vedios,
or if necessary, go onsite for investigation
4.Find out the root cause and provide solutions and reports to our customers
5.Confirm customer's loss and provide qualified products ASAP and close the case

FAQ: 

Q: Are you a trading company or a manufacturer?    
A: We are a manufacture as you can see our workshops' photos herein.
Q: What is your payment term?    
A: T/T, L/C, paypal, etc can be accepted.
Q: Can I place sample order first?      
A: Yes, we can provide sample first for your check.
Q:What kind of trade terms can you do?      
A: FOB, CIF, EXW, etc can be accpetd. 
Q: How to get to your factory?      
A: In nantong, we have Xindong Airport. If there is flight, you can first come to Xindong Airport, and then we shall go there and accept you. If there is not flight,  it is possible to go to Shanghai Airport (Hongqiao, Pudong are both okay), and then we shall pick up you there. 
Q: What features should I consider when choosing FRP gratings?      
A: You should consider your specific application in regards to environment, span, open area, impact resistance and layout utilization.
Q: Why is molded grating more corrosion resistant than pultruded grating of the same resin type?      
A: Resin protects the glass fibers from corrosive chemicals. Molded grating has 65% - 70% resin whereas pultruded grating has only 30 - 35% resin. Secondly, molded grating is one-piece        homogeneous construction whereas pultruded grating is assembled into panels. The corrosion   barrier of the pultruded pieces are compromised when holes are drilled into components for panel assembly.   
Q: What is the leading time for the samples?      
A: Normally 7 to 10 working days.
Q: What is the leading time for bulk order?      
A: Normally 30 to 40 working days.
Q: Do you have the MOQ for the products?      
A: No, we do not have any MOQ, 1pcs, 1 square meters is available for us. 
Q: Do you have detailed and professional installation manuals?      
A: Yes, we have. And we shall provide along with the shipping.

Contact Us: 



For more information, pleasefeel free to contact us and welcome to visit our company's website: www.chinamachs.com ! FRP gratings accessories, Clips, Paw type 
Product Description: 

Mach's grating supplies a number of different types of 316SS clips to attach its various molded and pultruded gratings to supporting members. Although the clips are illustrated here with molded grating products, similar clips are often available for our pultruded gratings as well. 

Installation- where possible, provide for a minimum of 40mm of bearing support at all grating
support points. Hold down clips should be used at the rate of one clips for every 0.5m 2 of grating
minimum, or at least 4 clips for any square or rectangular piece, or at least 3 for triangle piece
 
Classifications: 


About Mach's: 

1.A professional FRP grating manufacturer 10 years' experience in production and management
2.Approved by ISO, ABS, SGS, ASTM E84
3.Professional sales team
4.Over 100 professional workers
5.Provide high quality product,good after sales
6.Products acknowledged by many countries  like USA, England, Germany, etc. 

Our factory is located in Nantong, Jiangsu, which is near to shanghai. about 2 hours' drive. Nantong is a beautiful port city. 

Our Workshop: 


Our Certificates:



Our Warehouse:



Inspection before delivery & Package: 
 

Before delivery, we shall conduct FAT (visual inspect & load test) and  provide relative reports. If required by our customer, there shall be third party, and provide reports like ABS, SGS.

Report List:

1. ISO 9000 ABS Quality Evaluations
2. ABS Design Assessment
3. ABS Manufacturing Assessment
4. ASTM -E 84 Moulded Grating 1 class 15
5. ASTM -E 84 Moulded Grating 1 class 10
6. ASTM -E 84 Moulded Grating 1 class 25
7. UL -94 V -0
8. ROSH
9. EN 13501+A1 Fire classification

We provide corrugated boards, wooden package or steel pallet package. Or we can pack according to your 
request. 
Besides, check the package carefully and ensure that the package meet our customer's requirements. Take photos and send to customer for approval.
We promise all the products shall be delivered to your site intact without any damage. Believe in us.

Our Services: 

Pre-sale service: 
1. Custom design 
2. Product Consulting
3. Provide samples within 7 days

After-sale Service; 
1. Short Delivery time
2. Installation Instructions
3. 24h Consulting Service
4. Quality Compliants solving 


Our Promise: 

1. All items shall be furnished only by manufacturers having a minimum of ten (10) years experience in the design and manufacture of similar products and systems. Additionally, if requested, a record of at least five (5) previous, separate, similar successful installations in the last five (5) years shall be provided.
2. We shall offer a 3 year limited warranty on all FRP products against defects in materials and workmanship.
3. We shall provide proof, via independent testing less than six months old, that materials proposed as a solution do not contain heavy metals in amounts greater than that allowed by current EPA requirements


How we deal with customers' complaints? 
1.Accept complaints from our customers
2. Our sales team and QC team shall contact customers and investigate
(Analysis and fast reply within 24 hours)
3.Communicate and customers provide defect products' pictures or vedios,
or if necessary, go onsite for investigation
4.Find out the root cause and provide solutions and reports to our customers
5.Confirm customer's loss and provide qualified products ASAP and close the case

FAQ: 

Q: Are you a trading company or a manufacturer?    
A: We are a manufacture as you can see our workshops' photos herein.
Q: What is your payment term?    
A: T/T, L/C, paypal, etc can be accepted.
Q: Can I place sample order first?      
A: Yes, we can provide sample first for your check.
Q:What kind of trade terms can you do?      
A: FOB, CIF, EXW, etc can be accpetd. 
Q: How to get to your factory?      
A: In nantong, we have Xindong Airport. If there is flight, you can first come to Xindong Airport, and then we shall go there and accept you. If there is not flight,  it is possible to go to Shanghai Airport (Hongqiao, Pudong are both okay), and then we shall pick up you there. 
Q: What features should I consider when choosing FRP gratings?      
A: You should consider your specific application in regards to environment, span, open area, impact resistance and layout utilization.
Q: Why is molded grating more corrosion resistant than pultruded grating of the same resin type?      
A: Resin protects the glass fibers from corrosive chemicals. Molded grating has 65% - 70% resin whereas pultruded grating has only 30 - 35% resin. Secondly, molded grating is one-piece        homogeneous construction whereas pultruded grating is assembled into panels. The corrosion   barrier of the pultruded pieces are compromised when holes are drilled into components for panel assembly.   
Q: What is the leading time for the samples?      
A: Normally 7 to 10 working days.
Q: What is the leading time for bulk order?      
A: Normally 30 to 40 working days.
Q: Do you have the MOQ for the products?      
A: No, we do not have any MOQ, 1pcs, 1 square meters is available for us. 
Q: Do you have detailed and professional installation manuals?      
A: Yes, we have. And we shall provide along with the shipping.

Contact Us: 



For more information, pleasefeel free to contact us and welcome to visit our company's website: www.chinamachs.com !

Frame Insect Screen Door

Ideal for installation between door and roller shutters

Patent hinge close automatic to free your hand

Sturdy, powder-coated aluminium frame system
UV-resistant, light-and air-permeable
Simple assembly-Complete kit
Natural insect protection with open window/door
Profiles and fabrics individually can be shortened
Including mounting accessories and instructions
EN13561-2015 certification:
Resistance to wind load: Class 1
Operating effort: Class 2
Mechanical Endurance: Class 2
Resistance to corrosion: Class 2

Frame Insect Screen Door,Frame Bottom Hinged Windows,Aluminium Frame Casement Windows,Frame Screen Window

Huanghua Techo Building Material Co., Ltd. , https://www.insectsscreen.com