Explosion-proof lighting installation and use

The installation methods of explosion-proof lights include: ceiling-mounted, boom-type, wall-mounted, fence-type, flange-type, street lamp type.

Here we take a look at the difference between each installation method. Take the BCD series explosion-proof lamp as an example, the light source is energy-saving lamp, the installation method of explosion-proof lamp is different, and the accessories are not the same. The lamp is installed with energy-saving lamps as an example, explosion-proof lamps are not In case of change, ceiling-mounted installation requires explosion-proof pipe joints (or explosion-proof joints) and explosion-proof chandelier boxes; boom-type installation requires additional explosion-proof straight bars (the length of the straight bars can be customized according to customer requirements), explosion-proof chandelier boxes ; The wall installation consists of a curved bar with a zipper and a chandelier box;

Explosion-proof platform lamp poles have guardrail type and flange type. Fence type installation site needs fixed guardrail to use guardrail type installation; flange type installation has fixed flange chassis under it and can be directly fixed on the road surface or need On the plane of lighting, the total height of explosion-proof platform light poles is about 2.3 meters. There are two kinds of integrated pole and split type. Due to factors such as freight and volume, split type is more common; street light type explosion-proof lights are equipped with special LED explosion proof. Lamps, street light poles are 6 meters and 8 meters, higher heights need to be customized. The above two explosion-proof lamps can be installed as long as the lamp post and explosion-proof lamp match.

Of course, the use of explosion-proof lights can not be separated from the explosion-proof lighting switch, this can be based on the site environment reasonable use of IIB-class SW-10 explosion-proof lighting switch or IIC BZM8050 explosion-proof explosion-proof lighting switch, if the environment has hydrogen, sulfur dioxide, ethane One of the three, we must use IIC explosion-proof lighting switch, product performance relative to higher.

1. Introduction of Double Wire Fence:
Materials: Heavy Low Carbon Wire, Heavy Mild Steel Wire, Stainless Steel Wire 
Wire Dia.:2x6mm, 2x8mm
Mesh Openings:50*200 mm, 55*200 mm, 50*100 mm,50*150 mm ,etc.
Fence Width:2500mm 
Height Fence:630,1030,1230,1430,1630,1830,2030,2230,2430mm
2. Application of double wire fence:
double wire fence has simple structure ,firm and durable,easy to difficult to fade , so mainly used in highways,
airports,railway stations,service areas ,airports,ports and other fields,using high quality of iron wire as raw material,and welded panel ,after galvanized and powder coated is anti-corrosion and anti-oxidation.
3. Surface Treatment of double wire fence:
Forms of corrosion resistance include electric galvanizing,hot dipped galvanizing, PVC spraying and PVC coating(the thickness of powder coating is 100 microns usually). 
4. Post:
Square Post: 50*50mm,60*60mm,80*80mm,100*100mm (thickness 1.5mm-2.5mm)
Rectangular post: 80*60*2.5mm, 120*60*3mm
Peach Post: 50*70mm,60*90mm,70*100mm(thickness 1.5mm-2.5mm)
Post height: 1100-3000mm (remain 500mm under the ground)
5. Production process:
straighten & cut short the wire --- welding --- bending --- galvanizing --- parkerizing ---powder/pvc coating ---packaging

Double Wire Fence

Double Wire Fence,Wire Mesh Fencing,Double Wire Mesh Fence,Galvanised Mesh Fencing

Anping Bochuan Wire Mesh Co., Ltd. , https://www.wiremeshbocn.com