Environmentally friendly paint purchase: a look at the second and third hands

Paints and paints contain a lot of chemical substances, which produce harmful toxic gases such as formaldehyde and benzene, which endanger the health of family members. With the advancement of technology, the coating products on the market have begun to tend to be environmentally friendly. How to distinguish whether the coating is safe and non-toxic, can be used in a look, two, three hands. Paints and paints contain a lot of chemical substances, which produce harmful toxic gases such as formaldehyde and benzene, which endanger the health of family members. With the advancement of technology, the coating products on the market have begun to tend to be environmentally friendly. How to distinguish whether the coating is safe and non-toxic, can be used in a look, two, three hands.
At first glance, it is necessary to observe the raw material composition and quality inspection standards on the product packaging. According to the relevant regulations, the maximum allowable concentration of formaldehyde in the living room air is 0.08 mg/m3, and the formaldehyde emission of the product should not exceed 1.5 mg/l. When purchasing materials, consumers must clearly recognize whether there is a “China Environmental Label” on the product packaging, which is the ten-ring mark.

Second 掂 refers to the approximate weight (about 5 liters about 7 kg), and then shake the paint bucket, the regular high-quality latex paint generally can not hear the sound, otherwise it proves that the viscosity is insufficient.

Three hands refers to open barrel inspection to see if there is a hard block, whether there is odor, use a brush to stir the paint in the barrel to detect leveling. Close to the barrel of the paint product, smelling whether there is a clear pungent smell, if any, indicating that the possibility of coating poisonous and harmful gases is high.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Screw Pole Mounting System

Honde solar ground mounted system adopts full hot-galvanized steel structure and Ground Screw for panel installation. It is quite cost effective, and this screw-in foundation system is not only suitable for natural ground, but also for dense and even tarred surfaces.
Mounting type: carbon steel solar ground screw mounting system

Ground clearance: customized

Tilt angle: customized

Max wind speed: up to 60m/s

Snow load: 1.4KN/m2

Panel direction: portrait or landscape

Standard: International Standard & AS/NZS1170 & CE

Warranty: 5 years on material

Screw Pole Mounting System,Pole Ground Mounting System,Solar Panel Stand System

Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com