Embroidery wallpaper construction instructions
Embroidery wallpaper construction instructions:
1) The wall surface of the construction must be smooth, clean, dry, and free from peeling. The wall should be treated with moisture proof. It can be coated with a layer of varnish or white enamel base film, but it must be dried before it can be applied.
2) Embroidered wallpaper should not be soaked in water, but it can be scrubbed with a wet towel.
3) Embroidery wallpaper is cut according to the required length plus 10cm. It is necessary to consider the symmetry of the pattern on the wallpaper of the flower. The cutting length needs to be increased according to the actual situation. At the beginning, cut two pieces, and after attaching one piece, cut one piece for each piece, and don't cut all the materials together.
4) Before posting, first apply a layer of glue on the wall (preferably with wet glue), and then paste the wallpaper in order. It is recommended not to apply glue on the back of the embroidered wallpaper to prevent the glue from penetrating into the color line. Discoloration and other conditions.
5) Post the first wallpaper from top to bottom according to the wall surface, use a soft brush to gently scrape the wallpaper from top to bottom, from the middle to the sides, scrape the bubbles and excess glue, so that the wallpaper is flat and close to the wall. Yes (strong scraping is strictly prohibited, especially at the edge of the paper). Always use a clean, wet towel to remove spilled glue to prevent the wallpaper from yellowing. When posting the second wallpaper, aim at the first pattern and gently splicing the seam with the first wallpaper (the seam will be stitched at one time. It is strictly forbidden to scrape the edge of the paper with a squeegee). Then, as with the first wallpaper, gently scrape it, wipe off the spilled glue, and cut the excess wallpaper with a knife according to the stitching requirements. Pushing a third post like this, ...
6) After the wall of the non-woven wallpaper, the watermark is normal, and the natural dryness (remember not to turn on the air conditioner) will disappear.
Diamond Bruting Wheel,Used Water Well Drill Bit,Concrete Grinding Head,Glass Mounted Bit
Diamond Cutting Blade, Diamond Grinding /Abrasive/Wheels Co., Ltd. , http://www.nbdiamondtool.com