Electronic table scale work in the common fault solution

With the continuous use of electronic platform scales , many users believe that they have a certain understanding of electronic scales. However, when the electronic platform scale fails, it is masked and I do not know how to solve it. In order to help everyone use the electronic platform scale better, hard-working Xiaobian has compiled the articles on common fault solution in this work of electronic scales for everyone, hoping to be helpful to everyone.

Common fault solutions in electronic bench scale work:

Fault 1: No display after the electronic platform scale is turned on

Check items: Check whether the product is automatically shut down due to undervoltage in the battery (there is a built-in battery type); check whether the AC power voltage matches the voltage marked by the product and check whether the fuse is blown (using AC motor) as long as it is internal Short circuit problems may cause the product to fail to display properly.

Fault 2: electronic scales can not use the power charge

Check items: Check whether the AC power supply voltage matches the voltage marked on the product. Check if the fuse is blown (use AC motor); Check if the power supply is connected properly, and check if the socket board is used normally.
 

Fault 3: The digital jitter on the electronic scale display is unstable

Check items: Check whether the sensor connection is good sensor; Check whether the monitor is damp and the sensitivity setting is too small; Check whether the AD conversion speed inside the machine is set too high, whether there is vibration and wind and other interference; the final is to check the scale Does the station touch foreign objects?

Fault 4: The electronic scale has poor linearity and the error increases

Check items: Check whether the sensor protection device has been linearly calibrated (with a linear correction type) and the weight used for the linear correction is correct (with a linear correction type); see if the sensor is overloaded.

Fault 5: The electronic platform printer cannot print

Check items: Check that the printer type is set correctly, the reading is stable, and the stability flag is on; Check that the printer cable is plugged in; The printer is turned on; The printer is online (24-pin printer only).

This article is provided by Shanghai Shigan Industrial Co., Ltd. Thank you for your support and trust. If you have other questions about electronic scales, please contact us. Users concerned about this article are also concerned about: electronic scales, floor scales, wheelchair scales;