Eight things you must pay attention to in your old house decoration
Compared with the renovation of new homes, the renovation of old houses not only increases the amount of works, but also makes the decoration process more complicated. Many of these aspects are not encountered in the renovation of a new house, and therefore require more energy and time to complete the renovation of the old house. If you want to make the best use of your old home decoration, there are eight things you must understand. Let's look at it with me!
Eight Tips for Old Home Decoration:
One: Structure
Before the renovation of the old house, appropriate adjustments must be made to the structure; some unreasonable areas should be reconstructed; the previously wasted space should be reused; some non-load-bearing walls, top cabinets, and wall cabinets can be removed and modified. This can effectively improve indoor lighting and space utilization.
II: Waterway
1, according to the shower, wash basins, toilets, washing machines, vegetable sinks, mop pool, water purifiers, water heaters, the location of some inlet and outlet, drainage outlet.
2. Replace the existing old pipeline with a new one.
Three: Circuit
The circuit transformation of the old house must be thorough. The previous wires are basically copper wires of 1.5 square meters and need to be replaced with the latest qualified wires. Some old houses have relatively old distribution lines and the circuit is too simple. Therefore, we must re-plan a reasonable circuit. Under normal circumstances, the distribution box should have five switch circuits, including: master switch, lighting, common outlets, air conditioners, and kitchen and bathroom outlets. If you have a water heater, you need to add a separate circuit.
Four: weak electricity
Cables and telephone lines must be routed according to actual conditions. A network interface should be added to the location of each TV port to prepare for future network television.
Five: Wall
1. Eliminated the original putty that is not environmentally friendly and resistant to water. Replace it with an environmentally friendly water-resistant, anti-cracking putty.
2. For the original local hollow cracking on the wall and floor slabs, it must be removed to the grassroots, and then crack prevention treatment.
3. Many old house wall plastering layers are covered with paper limestone and the inside is a mixed mortar with very low bonding strength. This kind of wall surface is particularly prone to extensive emptying and cracking. Therefore, it is necessary to scrape putty before Crack prevention in advance.
4. The cracking of gypsum board must be carried out under the severe cracking of the inner insulation and non-bearing walls.
Six: doors and windows
If the original doors and windows do not have insulation, sound insulation and other effects, they must be removed and replaced. It is recommended that the old-fashioned iron windows be replaced with push-pull aluminum alloy doors and windows; the old entrance doors should be replaced with insulation, soundproof and fireproof security doors; and the non-insulated interior doors should be replaced with soundproof wooden doors with weather strips.
Seventh, insulation
Some old houses do not have insulation panels on their balcony panels and exterior walls. During the renovation, they should pay attention to adding a layer of insulation.
Eight: Waterproof
The waterproof of the old house's kitchen and bathroom has been aging for a long time, so it is necessary to re-lay waterproof. After the completion of waterproofing, attention should be paid to a 24-hour closed water test to ensure no leakage.
Edit Summary: The above description is about the old house renovation, old house renovation is a pleasure to do, after all, change your living environment conducive to change our mood. By then, we must pay attention to safety during the renovation. For example, bearing walls must not be tampered with, otherwise there will be hidden dangers.
Old house decoration
R404A is an HFC blend that is widely used in low and medium temperature refrigeration applications, such as those used in commercial refrigeration. Whilst it has become the widely accepted alternative to CFC R502, R404A is coming under greater scrutiny due to its high Global Warming Potential, leading to an increased focus on lower GWP alternatives such as R407C, R417A and R422D.
High Quality R404A Gas,Mixed Refrigerant Gas R410A,R404A Refrigerant,Blend Refrigerant Gas R404A
ZHEJIANG ZHONGLAN REFRIGERATION TECHNOLOGY CO.,LTD , https://www.uiszl.com