Ditch cover installation process Ditch cover product features
Due to its simple construction, light weight, good load-carrying capacity, impact resistance, non-folding of Ning bending, large displacement, good appearance and durability after hot dip galvanized treatment, and anti-corrosion, it has the advantages that the cast iron cover plate cannot match. And hinge connection or hook connection, etc., easy to open, and anti-theft function. Widely used in factories and some high-end communities. Then how to install the trench cover? Let's take a look with Xiao Bian below.
Ditch cover product classification
1. Usually we can divide the trench cover plate into hot-dip zinc ditch cover plate, stainless steel ditch cover plate, spray ditch cover plate and so on according to the different materials.
2. According to the groove cover shape, it can be divided into: common groove cover plate, U-shaped groove cover plate, tube groove cover plate and open trench cover plate.
Ditch cover installation process
First, we must carry out on-site measurement, that is, technical workers should follow the plan drawings and instructions for positioning the ditch for locating the ditch, and measure the site in order to ensure that the size of the ditch cover meets the size of the field. In addition to this, the actual construction personnel must also strictly follow the on-site measurement. The second step is to carry out cleaning. Workers must clean the corners of the side walls and drainage channels with a high degree of cleanliness. They must clean the residues, debris, mud and so on. But do not manually clean it yourself, use a high pressure hose to clean it.
Second, the next step is to install the drain cover. First of all, to remind everyone that the revision of the drainage ditch is to be scheduled in advance according to the actual size of the drainage ditch at the place where it is to be installed. After customizing it, it is transported to the edge of the drainage ditch, preferably at a fixed point. This is not only convenient. Installation is not easy to lose. After the completion of the drainage ditch, the construction personnel who installed the drainage ditch cover should inspect it. The place left behind by the concrete at that time should be cleaned up, and some uneven places should not be flat to ensure that the ditch cover installation base is flat. After that, the construction staff will install it, so that the installed drainage ditch cover is smooth and does not swing.
Third, the installation can be used normally. Xiao Bian is now to give you a few points to note when installing! First of all, Xiao Bian above has been introduced to everyone, must be checked in advance to ensure that there is no garbage at the same time the base of the drain cover installed is smooth, both sides The surface of the trench should be flat and stable. The second one is to pay attention to the fact that it is necessary to measure the size on the spot and carry out the construction according to the standard dimensions of the drawings. The constructor must not modify the size of the equipment at the time of construction. Otherwise, accidents may occur easily. Last but not least, according to the actual size of the drainage ditch you want to install, you should make a reservation for the drain cover. When installing, pay attention to the gap between the board and the board.
Ditch cover product features
1, beautiful appearance: simple lines, silver appearance, modern trends.
2. Optimal drainage: The leakage area is 83.3%, which is more than twice that of cast iron.
3, hot dip galvanized: strong rust prevention, maintenance-free and replacement.
4, anti-theft design: cover and frame hinge connection, anti-theft, security, easy to open.
5, save investment: large-span, heavy load, lower than the price of cast iron and save stolen or crush replacement costs.
6, high strength: strength and toughness is much higher than cast iron, can be used for docks, airports and other large span and heavy load environment.
7, specifications and more: to meet the different environment, load, span, size and shape required.
The product is simple in construction, light in weight, good in load, impact resistant, non-folding in Ning bending, large in displacement, beautiful and durable after hot dip galvanized treatment, anti-corrosion, and has the advantage that the cast iron cover cannot be similar. It is easy to open with anti-theft function by means of hinge connection or hook connection.
The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned.
Toilet smart cover construction installation product class own decoration house process heating installation
Wall Shelf,Kitchen Wall Shelf,Stainless Steel Kitchen Wall,Rolling Shelving Storage Shelving Organization
Suzhou CoreMission International Trading Co.,Ltd. , https://www.szcoremission.com