Home>Bearing knowledge>Installation method of slewing bearing

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Device method for slewing bearing

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1 Before the device slewing bearing device of the slewing bearing; first check the device surface of the main machine; the required supporting member should have the required strength; the connecting surface should be machined; the outer surface is smooth without debris and burrs. The flatness of the demand; the special plastic with high writing strength can be used as the filler; to ensure the accuracy of the plane of the device and to reduce vibration.
The ferrule bearing ferrule has a quenching soft belt zone; this has the symbol "S" on the end face of the ferrule; the device should be placed in a non-load zone or a very normal load zone (the plug hole is always soft) With).
When installing the slewing bearing; it should be positioned in the radial direction; insert the tightening device bolt; and check the reverse condition of the bearing. The tightening force should be satisfied when tightening the bolt; the pre-tightening force should be 70% of the bolt data yield limit. Bolts shall be fitted with tempered flat washers and the use of spring washers shall be prohibited.
2 The slewing bearing bearing protection device and the slewing bearing put into operation shall be in the continuous operation for 100 hours; all the pre-tightening torque of the device bolt shall be checked to meet the demand; in the future, repeat the above-mentioned inspection once every 500 hours.
The slewing bearing device should be filled with excess grease at the end; and the bearing should be reversed while filling to make the grease evenly distributed. After the slewing bearing is in operation for a period of time; inevitably, a part of the grease will be lost; The bearing should make up one grease after 50~100 hours per distance.
3 The slewing bearing transport and storage bearings are in the process of transport; should be placed horizontally on the vehicle; there should be ways to avoid slipping and avoid oscillation; if necessary, add auxiliary support.
The bearings should be placed horizontally in a dry, ventilated and leveled place; they should be separated from chemicals and other corrosive materials during storage. If multiple sets of bearings are required to be stacked, each set should be placed evenly along the circumferential direction. More than one level of flat wooden blocks; and the upper base blocks are placed together.
Bearings that need to be continuously stored beyond the anti-rust period; should be removed from the head and rust-proof disposal.

---

Recommend to friends comments close window

Bearing related knowledge

The method of reducing the bearing noise The characteristic of the grease function in the motor bearing teaches you the problem of rolling bearing fault diagnosis. High carbon chromium bearing steel becomes the trend of bearing steel.

This article links to http://
Please indicate China Bearing Network http://

Previous: Painting Skills: Introduction to Electroplating Process of Domestic Sliding Bearing Antifriction Layers Next: Distinctive Description of Adjustable Clearance Rolling Ball Bearings (II)

head lamp

Head Lamp,Rechargeable Head Lamp,LED Head Lamp,USB Rechargeable LED Head Light

Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com