Common terms and definitions of bearings (6)
2021-01-07 04:17:50
| Home>Bearing knowledge> Common terms and definitions of bearings (6) |
Common terms and definitions of bearings (6)
Source: China Bearing Network Time: 2018-04-04
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Roll the inner bore 11 of the inner ring or shaft of the bearing. Cylindrical bore
The inner bore of a bearing or bearing part; its busbar is essentially straight and parallel to the bearing axis or the bearing part axis.
12. Conical bore
The inner hole of a bearing or bearing part; its busbar is a straight line and intersects the bearing axis or the bearing part axis.
13. Bearing outside surface bearing outside surface
Rolling bearing outer ring or outer surface of the race.
14. Ferrule (washer) chamfering ring (washer) chamfer
The outer ring of the bearing or the outer surface of the outer ring and the outer end of the ferrule (gasket).
15. Overpass trough grinding undercut
In the ferrule or flange of the bearing ring or the flange of the bearing, the groove or groove is opened for easy grinding.
16. Seal (touch) appearance sealing (conract) surface
Sliding touch with the seal ring.
17. Seal (dust cover) slot seal(shield)groove
The groove used to adhere to the bearing seal (dust cover).
18. Stop ring groove
The slot used to hold the stop ring.
19. Smooth groove lubrication groove
a groove for conveying a smoothing agent on a bearing part.
20. Smooth hole lubrication hole
On the bearing part; the hole used to transport the smoothing agent to the roll.
(3) Bearing ring 1. Inner ring inner ring
The bearing ring of the raceway on the outer and outer surfaces.
2. Outer ring outer ring
The raceway of the raceway on the inner and outer surfaces.
3. Conical inner circle cone
The inner ring of a tapered roller bearing.
4. Conical outer ring cup
The outer ring of a tapered roller bearing.
5. Double raceway inner ring double cone
Tapered roller bearing inner ring with double raceway.
6. Double raceway cone outer ring double cup
Tapered roller bearing outer ring with double raceway.
7. Wide inner ring
A bearing inner ring that is widened at one or both ends; in order to improve the guiding of the shaft in its inner bore or the device fastener or seal supply to compensate for the orientation.
8. Locked inner ring stepped inner ring
A grooved ball bearing inner ring with a shoulder removed or partially removed.
9. Locked outer ring counterbored outer ring
A grooved ball bearing outer ring with a shoulder removed or partially removed.10. Drawn outer ring drawn cup
Stamped by a thin metal plate; one end seal (sealed stamped outer ring) or two open ferrules; usually pointed to the outer ring of the needle roller bearing.
11. Flange outer ring
Flanged bearing outer ring.
12. Self-aligning outer ring aligning outer ring
An outer ring with a spherical outer surface; a permanent angular displacement that occurs between the axis of the shaft and the axis of the bearing housing.
13. Self-aligning outer race aligning housing ring
It is used for the ferrule between the outer ring and the seat hole; it has a spherical inner and outer surface that matches the spherical outer surface of the outer ring.
14. Spherical outer surface
The outer outer surface of the bearing outer ring is part of the outer surface of the ball.
15. Conical outer ring front rib cup front face rib
The rib on the front of the tapered outer ring raceway; used to guide the roller and receive the thrust of the large end face of the roller.
Recommend to friends comments close window
| Bearing related knowledge |
| Talking about the relationship between the function of the bearing and the material, the "damage explanation" of the diesel engine bearing in operation Oscillation screen rolling bearing oscillation oscillation causes the bearing internal structure MM/MMV (machine tool bearing) |
This article links to http://
Please indicate the bearing network http://
Previous: No protection joint bearing without smooth solution Next: Skill analysis: ultimate axial bearing capacity of bearings
Metal cages limit pets, such as dogs, and allow them to move within a certain area to avoid injury. Or can also be used as a pet home, give some decoration. The material of the cage is the Galvanized Steel Pipes and Steel Mesh Panel to ensure the cage strong enough.
Dog run cage :
Material: Galvanized Pipe and mesh panel
Finishing:Hot dipped galvanized or powder coated
Size:2.3*2.3*1.2m
Weight:42kgs
Dog run fence
Panel size: 60cm*80cm/80cm*80cm
Pipe size:12mm*0.8mm,
Mesh size:50*150mm,
Wire diameter: 3.0mm,
Hot dipped galvanized+Powder coated
Metal Cage,Outdoor Large Dog Cage,Hot Dipped Galvanized Large Dog Cage,Welded Dog Kennel
HEBEI ZIFENG NEW ENERGY TECHNOLOGY CO.,LTD. , https://www.zifengpipeline.com