Choose the wooden door in three steps
Indispensable in modern home decoration is the purchase and decoration of doors, and many families are willing to use wooden doors as their first choice, not only because of the wide variety of wooden doors, safety and environmental protection, but also because the wooden doors are practical and durable, clever. However, there are so many kinds of wooden doors, how can we choose high-quality wooden doors? Then let Xiaobian help you.
Step 1: Understand the classification of wooden doors
1. Solid wood composite door: the door leaf frame is made of fir or pine wood, filled with honeycomb paper, MDF grid, bridge hole mechanical board, solid wood and other structures, and the surface substrate is medium density fiberboard or perforated particle board, and the surface is attached with various precious The solid wood veneer is made by hot pressing at high temperature, and is sealed with solid wood lines. The quality is light, and it is not easy to deform, and the cracking materials and styles are more diverse.
2. Paint-free door: It is similar to the solid wood composite door. It is mainly made of low-grade wood as the keel frame, and the surface of the external medium-density board or low-density board uses paint-free PVC film, and the price is cheap.
3. Moulded hollow door with plywood: framed with solid wood, decorated on both sides with decorative plates on the frame, made by hot pressing. The price is more affordable. Since the interior of the door panel is hollow, the sound insulation effect and feel are poor.
Step 2: Look at the paint
Comparing the fullness of the paint film, the fullness of the paint film means that the paint is of good quality, strong cohesive force, and good sealing of the wood. It also shows that the paint spraying process is relatively complete, and there is no suspicion of cutting corners.
Stand on the oblique side of the door to find the reflective angle of the facade, and see if the paint film on the surface is flat, whether the orange peel is obvious, and whether there are small particles protruding. If the orange peel phenomenon is more obvious, it means that the paint film baking process is not enough;
The fancy shape door depends on the edge of the line that produces the shape, especially whether the female corner (that is, the corner that can not be seen) has cracks in the paint film.
Step 3: Look at the hardware
Locks, hinges and other hardware also directly affect the comfort of the wooden door. You must choose hardware products with quality assurance. Choose different styles according to the function of the wooden door
The kitchen door should choose a door type with good waterproofness and tightness, so as to effectively block the oil smoke generated during cooking, such as a semi-transparent semi-glass door;
The bathroom door mainly focuses on privacy and waterproofness. In addition to the full solid wood door with unique materials, it is also possible to choose a fully frosted semi-glass door with a stylish design.
The most important thing for bedroom doors and study doors is to consider privacy and create a warm atmosphere. Therefore, most door types with good sound insulation, weak light transmission and solidity are used.
The editor-in-chief of the GO Good House in Suzhou compiled and compiled the report, sourced from China Doors and Windows Network (Changsha).
Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing.
Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass Bolts also require a pilot hole be driven before installtion.
Metal Pins,Stainless Steel Pins,Flange Alignment Pin,Safety Coupler Pin
Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com