Analysis of dry hanging technology of exterior wall stone
First, construction preparation:
1. Material requirements:
2) Stone: According to the design requirements, determine the variety, color, pattern and size specifications of the stone, and strictly control and check its bending resistance. Tensile and compressive strength, water absorption, freeze-thaw resistance and other properties.
2) Synthetic resin adhesive: The flexible backing material used for the back side of the stone is required to have waterproof and aging resistance.
3) Glass fiber mesh cloth: stone backing material.
4) Waterproof glue: used to seal the connector.
5) Anti-fouling strip: used to prevent contamination on the edge of the stone.
6) Caulking paste: used to insert stone joints.
7) Overcoat: It is used for anti-weathering and anti-pollution of marble surface.
8) The quality of the expansion bolts, connecting iron parts, connecting stainless steel pins and other supporting iron pads, washers, nuts and various joints required for the design and installation of the frame must meet the requirements.
2, the main equipment: bench drill, toothless cutting saw, impact drill, pistol drill, torque wrench, open end wrench, caulking gun, special trolley, long tape measure, box ruler, hammer, steel chisels of various shapes, relying on the ruler, Aluminum level ruler, square ruler, multi-purpose knife, scissors, and joint slits. Lead wire, powder line package for ink wire, ink fountain, small white wire, enamel, iron shovel, knife, ash trough, ash bucket, tool bag, gloves, red pencil, etc.
3. Working conditions:
1) Check whether the quality, specification, variety, quantity, mechanical properties and physical properties of the stone meet the design requirements and perform surface treatment work.
2) Set up the double-row rack to handle the structural base layer, and make the hidden pre-inspection record. After the qualified, the installation process can be carried out.
3) Hydropower and equipment, and embedded embedded parts on the wall have been installed. Vertical transport equipment is prepared in advance.
4) The outer door and window have been installed and the installation quality meets the requirements.
5) When technical personnel are engaged in technical disclosure, technical measures, quality requirements and finished product protection shall be emphasized, especially when the shelves are removed, the finished products shall not be collided. Before large-scale construction, samples should be made before the quality inspection department can pass the qualification test before the construction of the team can be organized.
How to Select the Best Grow Light for your Greenhouse?
The plant needs light to thrive cause the light is essental for photosynthesis.without it,plants can not make food.but light can also be too intense,too hot or last too long for growing healthy plants.plant growth accelerates with abundant light because more of the plant`s leaves have exposure,which means more photosynthesis.in the winter,days are not long enough,but many plants still need 12 hours or more of light per day.
Now,adding LED Grow Lights to your greenhouse is an nice choice if you live in the north, and can not get enough daylight in winter.you might be take HID into consideration,cause it has high output and cover a wide area.but now,we providing you some dfferent.the newest type of grow lights use LED technology.
Provides Maximum Light Density and optimizing spectrum(410nm-740nm,white)
as we know that the plants need more light from the blue side of the spectrum during their seedling stage and when developing foliage and require light from the orange to red side of the spectrum while inblooming and fruiting phases. We adopting lastest intergrated COB technology, white , more red and blue PAR(410-740nm) per Watt than any other lighting fixture for the best color uniformity.
Dual Veg and Bloom for plant growth and bloom
the Led grow lights feature selectable VEG and BLOOM light spectrums to deliver maximum performance from seeding through the flower stage and finally harvest.
Increase yields and potency
using high quality lense that hyper-focus the lights on your canopy.the photons are beamed directly to the plants.this gives growers the ability to get greatest possible crop yield.
Reduce your costs with energy efficiency
energy-efficient cannabis grow lights cost between 40%-60% less to operate compared to HID lam year.
Led grow light also eliminate the needs for ballasts and reflectors while they minimize the cooling systems,accelerating your payback.you will see the electrical bills trimmed by approximately half,year after year.
Installs and operates simply
the input voltage is AC100V-240V,fit for the world standard,built-in power supply.do not need other equipment,just access to the Plug,the lamp will be work smoothly. The led grow lighting is small size,just few inches and easy to install.it is the good option for some greenhouse.
Long lifespan
using built-in quiet fans and the shutter in the wind,induced draftfrom all sides.runs with quiet. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damagingthe lamp body.
What' the best indoor led grow light ?The definition of Philizon :
Safe and Reliable(Meet the safety requirments around the world)
Effective(Good efficacy for the plants)
Energy Conservation(High efficiency and high PPFD in same power)
Long life(Use long life span elements)
Soft and comfortable lights(No Harmful,Flicker free,protect your eyes)
Features
- Water-cooling design, 20°C+ lower than fan-cooling design
- Vac100-265 universal input voltage
- Advanced secondary optical lens design for penetration
- Smart over-heat protection system
- Product designed to ETL standards
- Completely noise-free with water-cooling system
- Effectual spectrums proven by professionals
- Quick slide-into-track system to combine two or more LED fixtures together
Item Display
Full Spectrum Indoor LED Grow Light and High PAR
Application
Our professional full spectrum Indoor LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Philizon Indoor LED Grow Lights by Light Efficient Design provide growers a better solution for reliable and effective agricultural lighting. Light Efficient Design has been making LED retrofit lamps for over six years, and has a strong product lineup, proven designs, and excellent reliability. And now, our energy-efficient, money-saving products are helping to promote success in indoor farming and commercial greenhouses.
Warmly welcome to take a visit on our Company at any time.
Indoor Led Grow Light,Popular Indoor Led Grow Lights,Popular Indoor Grow Lights,Urban Farming Grow Lights
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com